18 Years Factory ultracapacitor cells - SMD Conductive Polymer Capacitors CT Series – Holy
18 Years Factory ultracapacitor cells - SMD Conductive Polymer Capacitors CT Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 2.5 ~ 25 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±10% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
8 |
10 |
10 |
L |
6 |
6 |
7 |
12.0 |
8.0 |
12.6 |
W |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
H |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
C |
6 |
7.3 |
9.0 |
9.0 |
11.0 |
11.0 |
R |
0.5~0.8 |
0.5~0.8 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
P |
1.4 |
2.1 |
3.2 |
3.2 |
4.6 |
4.6 |
Standard Ratings
Rated voltage (V) |
Rated capacitance (uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
Rated ripple carrent (mArms/125℃100kHz) |
4 (0G) |
150 |
6.3*6 |
300 |
0.12 |
35 |
2450 |
700 |
680 |
10*8 |
544 |
0.12 |
25 |
3700 |
1057 |
|
6.3 (0J) |
82 |
6.3*6 |
3600 |
0.12 |
40 |
2400 |
686 |
100 |
6.3*6 |
300 |
0.12 |
40 |
2400 |
686 |
|
10 (1A) |
120 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
150 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
|
330 |
10*8 |
660 |
0.12 |
30 |
3700 |
1057 |
|
16 (1C) |
39 |
6.3*6 |
300 |
0.12 |
50 |
2050 |
586 |
47 |
6.3*6 |
300 |
0.12 |
80 |
1260 |
450 |
|
82 |
8*7 |
300 |
0.12 |
40 |
2700 |
711 |
|
150 |
10*8 |
480 |
0.12 |
35 |
3020 |
863 |
|
180 |
10*8 |
576 |
0.12 |
35 |
3020 |
863 |
|
220 |
8*12 |
704 |
0.12 |
20 |
3220 |
889 |
|
270 |
8*12 |
864 |
0.12 |
20 |
4000 |
1250 |
|
330 |
8*12 |
1056 |
0.12 |
20 |
4200 |
1350 |
|
470 |
8*12 |
1504 |
0.12 |
20 |
4300 |
1433 |
|
680 |
10*12 |
2176 |
0.12 |
18 |
4900 |
1400 |
|
25 (1E) |
22 |
6.3*6 |
300 |
0.12 |
70 |
1300 |
400 |
47 |
6.3*7 |
300 |
0.12 |
60 |
1500 |
500 |
|
82 |
10*8 |
410 |
0.12 |
45 |
2400 |
686 |
|
100 |
10*12 |
500 |
0.12 |
30 |
4320 |
1234 |
|
150 |
10*12 |
750 |
0.12 |
45 |
4320 |
1234 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Product detail pictures:

Related Product Guide:
Assume full obligation to meet all demands of our customers; accomplish ongoing advancements by promoting the advancement of our customers; become the final permanent cooperative partner of clientele and maximize the interests of shoppers for 18 Years Factory ultracapacitor cells - SMD Conductive Polymer Capacitors CT Series – Holy , The product will supply to all over the world, such as: Barcelona, Bolivia, Washington, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.

The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
