2019 Good Quality 70c240jw252xb: 24PF, RF Microwave High Q High Power Chip Ceramic Capacitor, 2500V, Original SMD Chip High Voltage Mlcc Ceramic Capacitor
We depend on sturdy technical force and continually create sophisticated technologies to fulfill the demand of 2019 Good Quality 70c240jw252xb: 24PF, RF Microwave High Q High Power Chip Ceramic Capacitor, 2500V, Original SMD Chip High Voltage Mlcc Ceramic Capacitor, We’ve been searching ahead to building positive and helpful links with all the providers within the planet. We warmly welcome you to definitely get in touch with us to begin discussions on how we are able to bring this into being.
We depend on sturdy technical force and continually create sophisticated technologies to fulfill the demand of China RF Capacitor and Ceramic Capacitor, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question matters they do not understand. We break down individuals barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 16 ~ 125 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
|
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
|
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
|
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
|
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) |
Rated ripple current (mArms/125℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1100 |
0.16 |
|
270 |
8*10.5 |
43.2 |
26 |
1500 |
0.16 |
|
|
470 |
10*10.5 |
75.2 |
21 |
2000 |
0.16 |
|
|
560 |
10*12.5 |
89.6 |
15 |
2300 |
0.16 |
|
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1000 |
0.16 |
|
150 |
8*10.5 |
37.5 |
27 |
1300 |
0.16 |
|
|
270 |
10*10.5 |
67.5 |
22 |
1500 |
0.16 |
|
|
330 |
10*12.5 |
82.5 |
16 |
1700 |
0.16 |
|
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
900 |
0.16 |
|
100 |
8*10.5 |
35 |
30 |
1200 |
0.16 |
|
|
150 |
10*10.5 |
52.5 |
23 |
1400 |
0.16 |
|
|
220 |
10*12.5 |
77 |
17 |
1700 |
0.16 |
|
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
900 |
0.16 |
|
56 |
8*10.5 |
22.4 |
32 |
1200 |
0.16 |
|
|
100 |
10*10.5 |
40 |
24 |
1400 |
0.16 |
|
|
120 |
10*12.5 |
48 |
18 |
1600 |
0.16 |
|
|
50 |
15 |
6.3*7.7 |
10 |
80 |
800 |
0.16 |
|
33 |
8*10.5 |
16.5 |
35 |
1100 |
0.16 |
|
|
56 |
10*10.5 |
28 |
25 |
1300 |
0.16 |
|
|
82 |
10*12.5 |
41 |
19 |
1500 |
0.16 |
|
|
63 |
10 |
6.3*7.7 |
10 |
100 |
700 |
0.16 |
|
22 |
8*10.5 |
13.86 |
40 |
1000 |
0.16 |
|
|
33 |
8*10.5 |
20.79 |
40 |
1000 |
0.16 |
|
|
33 |
10*10.5 |
20.79 |
30 |
1200 |
0.16 |
|
|
47 |
10*10.5 |
29.61 |
30 |
1200 |
0.16 |
|
|
56 |
10*12.5 |
35.28 |
22 |
1400 |
0.16 |
|
|
80 |
12 |
10*10.5 |
10 |
70 |
900 |
0.16 |
|
15 |
10*10.5 |
12 |
70 |
900 |
0.16 |
|
|
18 |
10*12.5 |
14.4 |
50 |
1100 |
0.16 |
|
|
100 |
10 |
10*10.5 |
10 |
80 |
800 |
0.16 |
|
12 |
10*10.5 |
12 |
80 |
800 |
0.16 |
|
|
15 |
10*12.5 |
15 |
60 |
1000 |
0.16 |
|
|
125 |
10 |
10*10.5 |
12.5 |
90 |
700 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
TB Series
●Low ESR
● High Voltage, Long Life
● 125℃,2,000~4,000hrs
● RoHS compliant
Items
Characteristics
Category
Temperature Range
-55 ~ +125℃
Rated Voltage Range
16 ~ 125 V
Capacitance tolerance
±20%(M) (at 20℃,120Hz)
Leakage Current
After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor
Less than or equal to the specified
(at 20℃,120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-55℃)/Z(+20℃)
≤0.75 to 1.5
(100KHz)
Z(+125℃)/Z(+20℃)
≤0.75 to 2.0
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Damp Heat
(Steady State)
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH.
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Surge Voltage
Surge Voltage=Rated voltage * 1.15(V)
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
We depend on sturdy technical force and continually create sophisticated technologies to fulfill the demand of 2019 Good Quality 70c240jw252xb: 24PF, RF Microwave High Q High Power Chip Ceramic Capacitor, 2500V, Original SMD Chip High Voltage Mlcc Ceramic Capacitor, We’ve been searching ahead to building positive and helpful links with all the providers within the planet. We warmly welcome you to definitely get in touch with us to begin discussions on how we are able to bring this into being.
2019 Good Quality China RF Capacitor and Ceramic Capacitor, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question matters they do not understand. We break down individuals barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
Products categories
-
China Factory for China High Power Long Cycle L...
-
Super Lowest Price China Super Capacitor 5.5V 0...
-
Manufactur standard Radial Type 2.7V 0.22f Supe...
-
OEM China China Ultracapacitor Module 16V500f, ...
-
Rapid Delivery for China Bigcap Coin Type C 1.0...
-
Original Factory Gtcap V Type Coin Supercapacit...
