2022 Latest Design Medical ultra capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy
2022 Latest Design Medical ultra capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 125 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*10.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*10.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*12.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1000 |
0.16 |
150 |
8*10.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*10.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*12.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
900 |
0.16 |
100 |
8*10.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*10.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*12.5 |
77 |
17 |
1700 |
0.16 |
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
900 |
0.16 |
56 |
8*10.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*10.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*12.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.7 |
10 |
80 |
800 |
0.16 |
33 |
8*10.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*10.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*12.5 |
41 |
19 |
1500 |
0.16 |
|
63 |
10 |
6.3*7.7 |
10 |
100 |
700 |
0.16 |
22 |
8*10.5 |
13.86 |
40 |
1000 |
0.16 |
|
33 |
8*10.5 |
20.79 |
40 |
1000 |
0.16 |
|
33 |
10*10.5 |
20.79 |
30 |
1200 |
0.16 |
|
47 |
10*10.5 |
29.61 |
30 |
1200 |
0.16 |
|
56 |
10*12.5 |
35.28 |
22 |
1400 |
0.16 |
|
80 |
12 |
10*10.5 |
10 |
70 |
900 |
0.16 |
15 |
10*10.5 |
12 |
70 |
900 |
0.16 |
|
18 |
10*12.5 |
14.4 |
50 |
1100 |
0.16 |
|
100 |
10 |
10*10.5 |
10 |
80 |
800 |
0.16 |
12 |
10*10.5 |
12 |
80 |
800 |
0.16 |
|
15 |
10*12.5 |
15 |
60 |
1000 |
0.16 |
|
125 |
10 |
10*10.5 |
12.5 |
90 |
700 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
TB Series
●Low ESR
● High Voltage, Long Life
● 125℃,2,000~4,000hrs
● RoHS compliant
Items
Characteristics
Category
Temperature Range
-55 ~ +125℃
Rated Voltage Range
16 ~ 125 V
Capacitance tolerance
±20%(M) (at 20℃,120Hz)
Leakage Current
After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor
Less than or equal to the specified
(at 20℃,120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-55℃)/Z(+20℃)
≤0.75 to 1.5
(100KHz)
Z(+125℃)/Z(+20℃)
≤0.75 to 2.0
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Damp Heat
(Steady State)
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH.
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Surge Voltage
Surge Voltage=Rated voltage * 1.15(V)
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Product detail pictures:

Related Product Guide:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for 2022 Latest Design Medical ultra capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy , The product will supply to all over the world, such as: Saudi Arabia, Pakistan, Nepal, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.

Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
