8 Year Exporter double-layer capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy
8 Year Exporter double-layer capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +105℃ | ||
| Rated Voltage Range | 16 ~ 125 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+105℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 to 10,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
|
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
|
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
|
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
|
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1500 |
0.16 |
|
270 |
8*10.5 |
43.2 |
26 |
2000 |
0.16 |
|
|
470 |
10*10.5 |
75.2 |
21 |
2600 |
0.16 |
|
|
560 |
10*12.5 |
89.6 |
15 |
3000 |
0.16 |
|
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1400 |
0.16 |
|
150 |
8*10.5 |
37.5 |
27 |
1900 |
0.16 |
|
|
270 |
10*10.5 |
67.5 |
22 |
2500 |
0.16 |
|
|
330 |
10*12.5 |
82.5 |
16 |
2900 |
0.16 |
|
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
1300 |
0.16 |
|
100 |
8*10.5 |
35 |
30 |
1800 |
0.16 |
|
|
150 |
10*10.5 |
52.5 |
23 |
2400 |
0.16 |
|
|
220 |
10*12.5 |
77 |
17 |
2800 |
0.16 |
|
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
1200 |
0.16 |
|
56 |
8*10.5 |
22.4 |
32 |
1700 |
0.16 |
|
|
100 |
10*10.5 |
40 |
24 |
2400 |
0.16 |
|
|
120 |
10*12.5 |
48 |
18 |
2700 |
0.16 |
|
|
50 |
15 |
6.3*7.7 |
10 |
80 |
1200 |
0.16 |
|
33 |
8*10.5 |
16.5 |
35 |
1600 |
0.16 |
|
|
56 |
10*10.5 |
28 |
25 |
2300 |
0.16 |
|
|
82 |
10*12.5 |
41 |
19 |
2600 |
0.16 |
|
|
63 |
10 |
6.3*7.7 |
10 |
100 |
1000 |
0.16 |
|
22 |
8*10.5 |
13.86 |
40 |
1500 |
0.16 |
|
|
33 |
8*10.5 |
20.79 |
40 |
1500 |
0.16 |
|
|
33 |
10*10.5 |
20.79 |
30 |
2100 |
0.16 |
|
|
47 |
10*10.5 |
29.61 |
30 |
2100 |
0.16 |
|
|
56 |
10*12.5 |
35.28 |
22 |
2400 |
0.16 |
|
|
80 |
12 |
10*10.5 |
10 |
70 |
1600 |
0.16 |
|
15 |
10*10.5 |
12 |
70 |
1600 |
0.16 |
|
|
18 |
10*12.5 |
14.4 |
50 |
1800 |
0.16 |
|
|
100 |
10 |
10*10.5 |
10 |
80 |
1400 |
0.16 |
|
12 |
10*10.5 |
12 |
80 |
1400 |
0.16 |
|
|
15 |
10*12.5 |
15 |
60 |
1600 |
0.16 |
|
|
125 |
10 |
10*10.5 |
12.5 |
90 |
1200 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:
Related Product Guide:
carry on to boost, to guarantee products excellent in line with market and consumer standard specifications. Our enterprise has a quality assurance system are actually established for 8 Year Exporter double-layer capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy , The product will supply to all over the world, such as: Cape Town, Brasilia, Croatia, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We are ready to face the worries and make the improve to understand all the possibilities in international trade.
By Elsie from Namibia - 2017.04.18 16:45
We have been looking for a professional and responsible supplier, and now we find it.
By Jenny from Belize - 2018.12.11 14:13
Write your message here and send it to us
