8 Year Exporter double-layer capacitor - SMD Conductive Polymer Capacitors CT Series – Holy
8 Year Exporter double-layer capacitor - SMD Conductive Polymer Capacitors CT Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 2.5 ~ 25 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±10% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
8 |
10 |
10 |
L |
6 |
6 |
7 |
12.0 |
8.0 |
12.6 |
W |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
H |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
C |
6 |
7.3 |
9.0 |
9.0 |
11.0 |
11.0 |
R |
0.5~0.8 |
0.5~0.8 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
P |
1.4 |
2.1 |
3.2 |
3.2 |
4.6 |
4.6 |
Standard Ratings
Rated voltage (V) |
Rated capacitance (uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
Rated ripple carrent (mArms/125℃100kHz) |
4 (0G) |
150 |
6.3*6 |
300 |
0.12 |
35 |
2450 |
700 |
680 |
10*8 |
544 |
0.12 |
25 |
3700 |
1057 |
|
6.3 (0J) |
82 |
6.3*6 |
3600 |
0.12 |
40 |
2400 |
686 |
100 |
6.3*6 |
300 |
0.12 |
40 |
2400 |
686 |
|
10 (1A) |
120 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
150 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
|
330 |
10*8 |
660 |
0.12 |
30 |
3700 |
1057 |
|
16 (1C) |
39 |
6.3*6 |
300 |
0.12 |
50 |
2050 |
586 |
47 |
6.3*6 |
300 |
0.12 |
80 |
1260 |
450 |
|
82 |
8*7 |
300 |
0.12 |
40 |
2700 |
711 |
|
150 |
10*8 |
480 |
0.12 |
35 |
3020 |
863 |
|
180 |
10*8 |
576 |
0.12 |
35 |
3020 |
863 |
|
220 |
8*12 |
704 |
0.12 |
20 |
3220 |
889 |
|
270 |
8*12 |
864 |
0.12 |
20 |
4000 |
1250 |
|
330 |
8*12 |
1056 |
0.12 |
20 |
4200 |
1350 |
|
470 |
8*12 |
1504 |
0.12 |
20 |
4300 |
1433 |
|
680 |
10*12 |
2176 |
0.12 |
18 |
4900 |
1400 |
|
25 (1E) |
22 |
6.3*6 |
300 |
0.12 |
70 |
1300 |
400 |
47 |
6.3*7 |
300 |
0.12 |
60 |
1500 |
500 |
|
82 |
10*8 |
410 |
0.12 |
45 |
2400 |
686 |
|
100 |
10*12 |
500 |
0.12 |
30 |
4320 |
1234 |
|
150 |
10*12 |
750 |
0.12 |
45 |
4320 |
1234 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Product detail pictures:

Related Product Guide:
Our target should be to consolidate and enhance the top quality and service of current goods, in the meantime frequently create new products to satisfy diverse customers' calls for for 8 Year Exporter double-layer capacitor - SMD Conductive Polymer Capacitors CT Series – Holy , The product will supply to all over the world, such as: Orlando, San Francisco, Czech, They're durable modeling and promoting effectively all over the world. Under no circumstances disappearing major functions in a quick time, it's a should for you of excellent good quality. Guided by the principle of "Prudence, Efficiency, Union and Innovation. the company make a terrific efforts to expand its international trade, raise its company profit and raise its export scale. We're confident that we are going to possess a vibrant prospect and to be distributed all over the world within the years to come.

We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!
