Best-Selling solid electrolytic capacitors vendor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy
Best-Selling solid electrolytic capacitors vendor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +105℃ | ||
| Rated Voltage Range | 16 ~ 125 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+105℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 to 10,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
|
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
|
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
|
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
|
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1500 |
0.16 |
|
270 |
8*10.5 |
43.2 |
26 |
2000 |
0.16 |
|
|
470 |
10*10.5 |
75.2 |
21 |
2600 |
0.16 |
|
|
560 |
10*12.5 |
89.6 |
15 |
3000 |
0.16 |
|
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1400 |
0.16 |
|
150 |
8*10.5 |
37.5 |
27 |
1900 |
0.16 |
|
|
270 |
10*10.5 |
67.5 |
22 |
2500 |
0.16 |
|
|
330 |
10*12.5 |
82.5 |
16 |
2900 |
0.16 |
|
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
1300 |
0.16 |
|
100 |
8*10.5 |
35 |
30 |
1800 |
0.16 |
|
|
150 |
10*10.5 |
52.5 |
23 |
2400 |
0.16 |
|
|
220 |
10*12.5 |
77 |
17 |
2800 |
0.16 |
|
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
1200 |
0.16 |
|
56 |
8*10.5 |
22.4 |
32 |
1700 |
0.16 |
|
|
100 |
10*10.5 |
40 |
24 |
2400 |
0.16 |
|
|
120 |
10*12.5 |
48 |
18 |
2700 |
0.16 |
|
|
50 |
15 |
6.3*7.7 |
10 |
80 |
1200 |
0.16 |
|
33 |
8*10.5 |
16.5 |
35 |
1600 |
0.16 |
|
|
56 |
10*10.5 |
28 |
25 |
2300 |
0.16 |
|
|
82 |
10*12.5 |
41 |
19 |
2600 |
0.16 |
|
|
63 |
10 |
6.3*7.7 |
10 |
100 |
1000 |
0.16 |
|
22 |
8*10.5 |
13.86 |
40 |
1500 |
0.16 |
|
|
33 |
8*10.5 |
20.79 |
40 |
1500 |
0.16 |
|
|
33 |
10*10.5 |
20.79 |
30 |
2100 |
0.16 |
|
|
47 |
10*10.5 |
29.61 |
30 |
2100 |
0.16 |
|
|
56 |
10*12.5 |
35.28 |
22 |
2400 |
0.16 |
|
|
80 |
12 |
10*10.5 |
10 |
70 |
1600 |
0.16 |
|
15 |
10*10.5 |
12 |
70 |
1600 |
0.16 |
|
|
18 |
10*12.5 |
14.4 |
50 |
1800 |
0.16 |
|
|
100 |
10 |
10*10.5 |
10 |
80 |
1400 |
0.16 |
|
12 |
10*10.5 |
12 |
80 |
1400 |
0.16 |
|
|
15 |
10*12.5 |
15 |
60 |
1600 |
0.16 |
|
|
125 |
10 |
10*10.5 |
12.5 |
90 |
1200 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:
Related Product Guide:
To fulfill the customers' over-expected satisfaction , we have now our strong crew to provide our greatest general assistance which incorporates promoting, gross sales, planning, creation, top quality controlling, packing, warehousing and logistics for Best-Selling solid electrolytic capacitors vendor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy , The product will supply to all over the world, such as: Wellington, venezuela, Turkey, We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we've got better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We have been always here working for your demands whenever you require.
By Alexandra from Lebanon - 2018.09.29 13:24
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Rebecca from Monaco - 2018.06.30 17:29
Write your message here and send it to us
