Bottom price 7.5V Ultracapacitor - Radial Conductive Polymer Solid Capacitors CA Series – Holy
Bottom price 7.5V Ultracapacitor - Radial Conductive Polymer Solid Capacitors CA Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 2.5 ~ 25V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Rated voltage (V) | 2.5~25 | (at 20℃,120Hz) |
tanδ (Max.) | 0.12 | ||
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
ESR(mΩ)at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
2.5 |
680 |
8*12 |
10 |
5330 |
820 |
8*12 |
10 |
5330 |
|
1500 |
10*12 |
10 |
5600 |
|
4 |
560 |
8*12 |
10 |
5330 |
1200 |
10*12 |
10 |
5600 |
|
6.3 |
820 |
6.3*11 |
16 |
3500 |
680 |
8*12 |
12 |
4820 |
|
1000 |
8*12 |
12 |
4820 |
|
820 |
10*12 |
10 |
5600 |
|
1000 |
10*12 |
10 |
5400 |
|
1500 |
10*12 |
10 |
5600 |
|
10 |
330 |
6.3*11 |
16 |
2000 |
560 |
8*12 |
12 |
4500 |
|
1000 |
8*12 |
12 |
4500 |
|
820 |
10*12 |
12 |
6100 |
|
1000 |
10*12 |
12 |
6100 |
|
1500 |
10*12 |
12 |
6100 |
|
16 |
220 |
6.3*11 |
25 |
2500 |
330 |
8*12 |
13 |
4800 |
|
470 |
8*12 |
13 |
4800 |
|
560 |
8*12 |
13 |
4800 |
|
560 |
10*12 |
13 |
5250 |
|
1000 |
10*12 |
13 |
5250 |
|
20 |
100 |
8*12 |
30 |
2750 |
150 |
10*12 |
25 |
2900 |
|
25 |
82 |
5*11 |
55 |
1500 |
150 |
6.3*11 |
55 |
1500 |
|
47 |
8*12 |
24 |
2320 |
|
68 |
8*12 |
24 |
3320 |
|
270 |
8*12 |
15 |
4900 |
|
330 |
10*12 |
15 |
4900 |
|
470 |
10*12 |
15 |
4900 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
Coefficient | 0.05 | 0.30 | 0.70 | 1.00 |
Product detail pictures:

Related Product Guide:
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Bottom price 7.5V Ultracapacitor - Radial Conductive Polymer Solid Capacitors CA Series – Holy , The product will supply to all over the world, such as: Luxembourg, Sri Lanka, Lesotho, As an experienced factory we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of the company is to live a satisfactory memory to all the customers,and establish a long term win-win business relationship. For more information,please contact us. And it's our great pleasure if you like to have a personally meeting in our office.

The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.

Write your message here and send it to us