China Factory for High voltage ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy

Short Description:

Send email to us Download

Product Detail

Product Tags

Feedback (2)

carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for Radial supercapacitor, Ultra capacitor pack, Conductive Polymer Electrolytic Capacitors, First company, we understand each other. Further more company, the trust is getting there. Our enterprise normally at your provider anytime.

China Factory for High voltage ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy Detail:

Specifications

Items	Characteristics
CategoryTemperature Range	-55 ~ +105℃
Rated Voltage Range	16 ~ 125 V
Capacitance tolerance	±20%(M) (at 20℃,120Hz)
Leakage Current	After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor	Less than or equal to the specified		(at 20℃,120Hz)
Low TemperatureCharacteristics(Max.Impedance Ratio)	Z(-55℃)/Z(+20℃)	≤0.75 to 1.5	(100KHz)
	Z(+105℃)/Z(+20℃)	≤0.75 to 2.0
Endurance	The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 to 10,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
	Appearance	No significant damage
	Capacitance change	≦±30% of the initial value
	D.F.(tanδ)	≦200% of the specified value
	ESR	≦200% of the specified value
	Leakage current	≦The specified value
Damp Heat (Steady State)	The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH.
	Appearance	No significant damage
	Capacitance change	≦±30% of the initial value
	D.F.(tanδ)	≦200% of the specified value
	ESR	≦200% of the specified value
	Leakage current	≦The specified value
Surge Voltage	Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
	Appearance	No significant damage
	Capacitance change	≦±30% of the initial value
	D.F.(tanδ)	≦200% of the specified value
	ESR	≦200% of the specified value
	Leakage current	≦The specified value

Dimensions (mm)

Size	ΦD	L	W	H	C	R	P	V max
6.3*7.7	6.3	7.7	6.6	6.6	7.3	0.5~0.8	2.1	0.3
8*10.5	8	10.5	8.3	8.3	9	0.7~1.1	3.2	0.3
10*10.5	10	10.5	10.3	10.3	11	0.7~1.3	4.6	0.3
10*12.5	10	12.5	10.3	10.3	11	0.7~1.3	4.6	0.3

product-description1

Standard Ratings

Rated voltage (V)	Rated capacitance(uF)	Case size ΦD*L(mm)	Leakage carrent (uA)	ESR(mΩ) at 20℃,100 KHz	Rated ripple current (mArms/105℃/100kHz)	tanδ（120Hz）
16	120	6.3*7.7	19.2	40	1500	0.16
	270	8*10.5	43.2	26	2000	0.16
	470	10*10.5	75.2	21	2600	0.16
	560	10*12.5	89.6	15	3000	0.16
25	68	6.3*7.7	17	45	1400	0.16
	150	8*10.5	37.5	27	1900	0.16
	270	10*10.5	67.5	22	2500	0.16
	330	10*12.5	82.5	16	2900	0.16
35	47	6.3*7.7	16.45	60	1300	0.16
	100	8*10.5	35	30	1800	0.16
	150	10*10.5	52.5	23	2400	0.16
	220	10*12.5	77	17	2800	0.16
40	27	6.3*7.7	10.8	70	1200	0.16
	56	8*10.5	22.4	32	1700	0.16
	100	10*10.5	40	24	2400	0.16
	120	10*12.5	48	18	2700	0.16
50	15	6.3*7.7	10	80	1200	0.16
	33	8*10.5	16.5	35	1600	0.16
	56	10*10.5	28	25	2300	0.16
	82	10*12.5	41	19	2600	0.16
63	10	6.3*7.7	10	100	1000	0.16
	22	8*10.5	13.86	40	1500	0.16
	33	8*10.5	20.79	40	1500	0.16
	33	10*10.5	20.79	30	2100	0.16
	47	10*10.5	29.61	30	2100	0.16
	56	10*12.5	35.28	22	2400	0.16
80	12	10*10.5	10	70	1600	0.16
	15	10*10.5	12	70	1600	0.16
	18	10*12.5	14.4	50	1800	0.16
100	10	10*10.5	10	80	1400	0.16
	12	10*10.5	12	80	1400	0.16
	15	10*12.5	15	60	1600	0.16
125	10	10*10.5	12.5	90	1200	0.16

Rated Ripple Current Coefficient

Frequency (Hz)	120Hz≤f＜1kHz	1kHz≤f＜10kHz	10kHz≤f＜100kHz	100kHz≤f＜500kHz
4.7＜C≦33	0.05	0.32	0.67	1.00
C＞33	0.10	0.35	0.70	1.00

Product detail pictures:

Related Product Guide:

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for China Factory for High voltage ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy , The product will supply to all over the world, such as: Israel, Slovak Republic, Irish, We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide best products for our customers.

2.5V Ultracapacitor