China Manufacturer for H TYPE Ultracapacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy
China Manufacturer for H TYPE Ultracapacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 16 ~ 50 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
|
ΦD |
6.3 |
8 |
10 |
10 |
|
L |
L+1.5Max |
|||
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
|
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
|
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
|
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
|
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
|
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:
Related Product Guide:
Our primary target will be to provide our clients a serious and responsible small business relationship, supplying personalized attention to all of them for China Manufacturer for H TYPE Ultracapacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy , The product will supply to all over the world, such as: New York, European, Belize, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Donna from Lithuania - 2017.12.31 14:53
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Dinah from Nairobi - 2017.03.07 13:42
Write your message here and send it to us
