China OEM Aluminum Electrolytic Capacitor
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for China OEM Aluminum Electrolytic Capacitor, Our customers mainly distributed while in the North America, Africa and Eastern Europe. we are able to offer high-quality goods with all the pretty competitive value.
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for China Start Capacitor and Motor Run Capacitor, Since its foundation , the company keeps living up to the belief of “honest selling , best quality , people-orientation and benefits to customers. ” We’re doing everything to supply our customers with best services and best products and solutions . We promise that we are going to be responsible all the way to the end once our services begin.
Specifications
Items |
Characteristics |
||||||||||||||||||||||
-40 ~ +105℃(6.3 ~ 100V.DC) |
-25 ~ +105℃(160~ 500V.DC) |
||||||||||||||||||||||
Category | |||||||||||||||||||||||
Temperature Range | |||||||||||||||||||||||
6.3 ~ 500V.DC |
|||||||||||||||||||||||
Rated Voltage Range | |||||||||||||||||||||||
Capacitance Tolerance |
±20%(M) (at 20℃,120Hz) |
||||||||||||||||||||||
Leakage Current |
I≤0.02CV (0.03CV for L=20mm )or 3μA , whichever is smaller (after 5 minutes application of rated voltage |
||||||||||||||||||||||
Note: I=Max,leakage current (μA), C=Nominal capacitance(μF), V=Rated voltage(V) (at 20℃) |
|||||||||||||||||||||||
Rate Voltage(V) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
80 |
100 |
160-250 |
315-400 |
450 |
500 |
||||||||||
tanδ(Max) |
0.60 |
0.50 |
0.40 |
0.30 |
0.25 |
0.20 |
0.15 |
0.15 |
0.15 |
0.15 |
0.20 |
0.20 |
0.24 |
||||||||||
Dissipation Factor | |||||||||||||||||||||||
When nominal capacitance exceeds 1000μF,add 0.02 to the value above for each 1000μF increase. (at 20℃,120HZ) | |||||||||||||||||||||||
Low TemperatureCharacteristics(Max,Impedance) | The impedance ratio shall not exceed the values listed in the table.(at 120Hz) | ||||||||||||||||||||||
Rated voltage (V) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
80 |
100 |
160-250 |
315-400 |
450 |
500 |
||||||||||
Z(-25℃)/Z(+20℃) |
4 |
4 |
4 |
3 |
3 |
2 |
2 |
2 |
2 |
4 |
4 |
8 |
10 |
||||||||||
Z (-40℃)/Z(+20℃) |
15 |
15 |
15 |
10 |
8 |
6 |
6 |
5 |
5 |
- |
- |
- |
– |
||||||||||
Endurance | |||||||||||||||||||||||
The following specifications shall be satisfied when the capacitors are restored to 20℃ after applied within Maximum allowable ripple current and not over rated voltage range after 2000 hours at 105℃ | |||||||||||||||||||||||
Capacitance change | ≦±20% of the initial value | ||||||||||||||||||||||
D.F.(tanδ) | ≦200% of the specified value | ||||||||||||||||||||||
Leakage current | ≦The specified value | ||||||||||||||||||||||
Shelf Life | The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 105℃ without voltage applied. | ||||||||||||||||||||||
Capacitance change | ≦±20% of the initial value | ||||||||||||||||||||||
D.F.(tanδ) | ≦150% of the specified value | ||||||||||||||||||||||
Leakage current | ≦200% of the specified value |
Dimensions (mm)
Rated Ripple Current Coefficient
Frequency (Hz) | 50 | 120 | 300 | 1k | 10k | 50k |
6.3~50V | 0.95 | 1 | 1.03 | 1.05 | 1.08 | 1.08 |
62~100V | 0.92 | 1 | 1.07 | 1.13 | 1.19 | 1.2 |
160~250V | 0.81 | 1 | 1.17 | 1.32 | 1.45 | 1.5 |
315~450V | 0.77 | 1 | 1.16 | 1.3 | 1.41 | 1.43 |
Standard Ratings
Cap.( μF) WV(V) |
6.3(0J) |
10(1A) |
16(1C) |
|||||||||
6800 |
22*25 1.57 |
|||||||||||
10000 |
22*25 1.55 |
22*30 1.97 |
25*25 1.97 |
|||||||||
12000 |
22*25 1.54 |
22*30 1.77 |
22*35 2.22 |
25*30 2.24 |
30*25 2.45 |
|||||||
15000 |
22*25 1.72 |
22*30 1.97 |
25*25 1.96 |
22*40 2.55 |
25*35 2.58 |
30*25 2.52 |
||||||
18000 |
22*30 1.95 |
25*25 1.96 |
22*35 2.21 |
25*30 2.23 |
22*45 2.87 |
25*40 2.92 |
30*30 2.88 |
35*25 2.92 |
||||
22000 |
22*35 2.23 |
25*30 2.25 |
30*25 2.28 |
22*40 2.51 |
25*35 2.54 |
35*25 2.40 |
25*45 3.32 |
30*35 3.29 |
35*25 3.23 |
|||
27000 |
22*40 2.54 |
25*35 2.57 |
30*25 2.52 |
22*50 2.93 |
25*40 2.90 |
30*30 2.87 |
35*25 2.73 |
25*50 3.78 |
30*40 3.77 |
35*30 3.45 |
||
33000 |
22*45 2.88 |
25*40 2.93 |
30*30 2.89 |
35*25 2.93 |
25*45 3.30 |
30*35 3.28 |
35*30 3.16 |
30*45 4.30 |
35*35 4.26 |
|||
39000 |
25*40 3.18 |
30*35 3.26 |
35*30 3.40 |
25*50 3.68 |
30*40 3.69 |
35*30 3.43 |
30*50 4.81 |
35*40 4.79 |
||||
47000 |
25*50 3.69 |
30*40 3.69 |
35*30 3.73 |
30*45 4.17 |
35*35 3.76 |
35*45 5.43 |
||||||
56000 |
30*45 4.16 |
35*35 4.12 |
30*50 4.68 |
35*40 4.67 |
||||||||
68000 |
30*50 4.71 |
35*40 4.69 |
35*50 5.46 |
|||||||||
82000 |
35*45 5.32 |
|||||||||||
Cap.( μF) WV(V) |
25(1E) |
35(1V) |
50(1H) |
|||||||||
1800 |
22*25 1.33 |
|||||||||||
2700 |
22*30 1.69 |
25*25 1.70 |
||||||||||
3300 |
22*25 1.40 |
22*35 1.93 |
25*30 1.85 |
|||||||||
3900 |
22*30 1.57 |
22*40 2.16 |
25*35 2.18 |
30*25 1.95 |
||||||||
4700 |
22*25 1.50 |
22*30 1.72 |
25*25 1.80 |
22*45 2.43 |
25*35 2.39 |
30*30 2.25 |
35*25 2.48 |
|||||
5600 |
22*25 1.63 |
22*35 1.95 |
25*30 1.96 |
35*25 1.99 |
22*50 2.75 |
22*40 2.70 |
30*35 2.76 |
35*25 2.70 |
||||
6800 |
22*30 1.86 |
25*25 1.87 |
22*40 2.20 |
25*35 2.23 |
30*25 2.19 |
25*50 3.30 |
30*40 3.30 |
35*30 3.25 |
||||
8200 |
22*35 2.11 |
25*30 2.12 |
30*25 2.15 |
22*50 2.53 |
25*40 2.53 |
30*30 2.75 |
35*25 2.75 |
30*45 3.60 |
35*35 3.55 |
|||
10000 |
22*40 2.39 |
25*35 2.42 |
30*25 2.37 |
25*45 2.87 |
30*35 2.90 |
35*30 2.91 |
30*50 4.04 |
35*40 4.03 |
||||
12000 |
22*45 2.69 |
25*40 2.74 |
30*30 2.70 |
35*25 2.74 |
25*50 3.24 |
30*40 3.23 |
35*30 2.99 |
35*45 4.55 |
||||
15000 |
25*45 3.15 |
30*35 3.13 |
35*30 3.27 |
30*45 3.72 |
35*35 3.67 |
|||||||
18000 |
25*50 3.54 |
30*40 3.54 |
35*30 3.58 |
35*40 4.37 |
||||||||
22000 |
30*45 4.04 |
35*35 3.64 |
35*50 4.92 |
|||||||||
27000 |
35*45 4.73 |
|||||||||||
33000 |
35*50 5.39 |
Standard Ratings
Cap.( μF) WV(V) |
6.3(1J) |
80(1k) |
100(2A) |
|||||||||
560 |
22*25 1.05 |
|||||||||||
820 |
22*25 1.11 |
22*30 1.32 |
25*25 1.33 |
|||||||||
1000 |
22*25 1.22 |
22*35 1.50 |
25*30 1.51 |
|||||||||
1200 |
22*25 1.19 |
22*30 1.38 |
25*25 1.39 |
22*40 1.69 |
25*35 1.71 |
30*25 1.68 |
||||||
1500 |
22*25 1.33 |
22*35 1.59 |
25*30 1.61 |
22*45 1.94 |
25*40 1.98 |
30*25 1.95 |
35*25 1.98 |
|||||
1800 |
22*30 1.51 |
25*25 1.52 |
22*40 1.80 |
25*30 1.76 |
30*25 1.65 |
25*45 2.23 |
30*30 2.50 |
35*25 2.17 |
||||
2200 |
22*35 1.73 |
25*30 1.74 |
30*25 1.50 |
22*45 2.04 |
25*35 2.01 |
30*30 2.05 |
35*25 2.07 |
25*50 2.53 |
30*40 2.70 |
35*30 2.50 |
||
2700 |
22*40 1.97 |
25*35 1.99 |
30*25 1.76 |
25*45 23.6 |
30*35 2.35 |
35*25 2.29 |
30*45 2.88 |
35*35 2.86 |
||||
3300 |
22*50 2.29 |
25*40 2.27 |
30*30 2.24 |
35*25 2.06 |
25*50 2.68 |
30*40 2.68 |
35*30 2.45 |
30*50 3.28 |
35*40 3.27 |
|||
3900 |
25*45 2.54 |
30*35 2.55 |
35*25 32.24 |
30*45 3.00 |
35*35 2.98 |
35*45 3.67 |
||||||
4700 |
25*50 2.86 |
30*40 2.86 |
35*30 2.79 |
30*50 3.39 |
35*40 3.38 |
35*50 3.80 |
||||||
5600 |
30*45 3.22 |
35*35 3.19 |
35*45 3.80 |
|||||||||
6800 |
30*50 3.65 |
35*40 3.64 |
35*50 3.90 |
|||||||||
8200 |
35*45 3.90 |
|||||||||||
10000 |
35*50 4.40 |
|||||||||||
Cap.( μF) WV(V) |
160(2C) |
180(2Z) |
200(2D) |
|||||||||
150 |
22*20 0.66 |
|||||||||||
180 |
22*20 0.73 |
22*20 0.72 |
||||||||||
220 |
22*20 0.8 |
22*20 0.80 |
22*25 0.79 |
25*20 0.83 |
||||||||
270 |
22*25 1.09 |
22*25 0.96 |
25*20 0.92 |
22*25 0.87 |
25*25 1.09 |
|||||||
330 |
22*25 1.20 |
25*20 1.02 |
22*25 1.06 |
25*25 1.20 |
22*30 1.20 |
25*25 1.21 |
30*20 1.08 |
|||||
390 |
22*30 1.30 |
25*25 1.28 |
30*20 1.17 |
22*30 1.30 |
25*25 1.30 |
35*20 1.17 |
22*35 1.31 |
25*25 1.31 |
30*25 1.37 |
|||
470 |
22*35 1.40 |
25*25 1.41 |
30*20 1.28 |
22*35 1.35 |
25*30 1.40 |
30*25 1.38 |
35*20 1.41 |
22*40 1.40 |
25*30 1.41 |
30*25 1.50 |
35*20 1.41 |
|
560 |
22*40 1.50 |
25*30 1.51 |
30*25 1.56 |
35*20 1.54 |
22*40 1.51 |
25*35 1.53 |
30*25 1.51 |
35*20 1.53 |
22*45 1.56 |
25*35 1.53 |
30*25 1.63 |
35*25 1.56 |
680 |
22*45 1.71 |
25*35 1.70 |
30*25 1.72 |
35*20 1.70 |
22*45 1.71 |
25*40 1.74 |
30*30 1.72 |
35*25 1.74 |
22*50 1.74 |
25*40 1.74 |
30*30 1.74 |
35*25 1.72 |
820 |
22*50 1.93 |
25*40 2.01 |
30*30 2.00 |
35*25 1.91 |
22*50 1.97 |
25*45 1.97 |
30*35 2.00 |
35*25 1.91 |
25*50 2.04 |
30*35 2.00 |
35*30 2.04 |
|
1000 |
25*45 2.20 |
30*35 2.22 |
35*25 2.21 |
25*50 2.23 |
30*40 2.24 |
35*30 2.26 |
30*45 2.30 |
35*35 2.30 |
||||
1200 |
25*50 2.45 |
30*40 2.44 |
35*30 2.44 |
30*45 2.52 |
35*35 2.50 |
30*50 2.60 |
35*40 2.65 |
|||||
1500 |
30*45 2.82 |
35*35 2.50 |
30*50 2.89 |
35*40 2.89 |
35*45 3.08 |
|||||||
1800 |
30*50 3.31 |
35*45 3.31 |
35*40 3.17 |
35*50 3.47 |
||||||||
2200 |
35*50 3.77 |
35*50 3.60 |
Standard Ratings
Cap.( μF) WV(V) |
250(2E) |
315(2F) |
350(2V) |
|||||||||
56 |
22*20 0.4 |
|||||||||||
68 |
22*20 0.44 |
22*25 0.51 |
||||||||||
82 |
22*25 0.64 |
22*25 0.56 |
25*20 0.51 |
|||||||||
100 |
22*30 0.68 |
25*20 0.56 |
22*30 0.69 |
25*25 0.69 |
30*20 0.59 |
|||||||
120 |
22*20 0.59 |
22*30 0.75 |
25*25 0.76 |
30*20 0.65 |
22*35 0.75 |
25*25 0.75 |
30*20 0.64 |
|||||
150 |
22*25 0.71 |
22*35 0.82 |
25*30 0.80 |
30*25 0.82 |
22*40 0.82 |
25*30 0.83 |
30*25 0.83 |
35*20 0.76 |
||||
180 |
22*25 0.78 |
25*20 0.75 |
22*40 0.91 |
25*30 0.88 |
30*25 0.90 |
35*20 0.83 |
22*45 0.92 |
25*35 0.92 |
30*25 0.91 |
35*25 0.94 |
||
220 |
22*30 0.95 |
25*25 0.95 |
30*20 0.88 |
22*45 1.02 |
25*35 1.02 |
30*30 1.02 |
35*25 1.03 |
22*50 1.05 |
25*40 1.04 |
30*30 1.02 |
35*25 1.04 |
|
270 |
22*35 1.14 |
25*25 1.05 |
30*20 0.97 |
22*50 1.16 |
25*40 1.15 |
30*35 1.17 |
35*25 1.15 |
25*45 1.18 |
30*35 1.17 |
35*30 1.20 |
||
330 |
22*40 1.26 |
25*30 1.20 |
30*25 1.26 |
35*20 1.18 |
25*50 1.33 |
30*35 1.30 |
35*30 1.32 |
30*40 1.34 |
35*30 1.33 |
|||
390 |
22*45 1.49 |
25*35 1.49 |
30*25 1.37 |
35*25 1.43 |
30*40 1.46 |
35*35 1.47 |
30*45 1.51 |
35*35 1.47 |
||||
470 |
22*50 1.57 |
25*40 1.57 |
30*30 1.57 |
35*25 1.57 |
30*50 1.70 |
35*40 1.69 |
35*40 1.69 |
|||||
560 |
22*45 1.79 |
30*35 1.79 |
35*25 1.62 |
35*30 1.79 |
35*45 1.90 |
35*45 1.90 |
||||||
680 |
25*50 1.84 |
30*40 2.00 |
35*30 1.97 |
35*50 2.15 |
||||||||
820 |
30*45 2.16 |
35*35 1.98 |
||||||||||
1000 |
35*40 2.30 |
|||||||||||
1200 |
35*45 2.43 |
|||||||||||
Cap.( μF) WV(V) |
400(2G) |
450(2W) |
500(2H) |
|||||||||
47 |
22*20 0.37 |
|||||||||||
56 |
22*20 0.4 |
22*25 0.4 |
||||||||||
68 |
22*25 0.51 |
25*20 0.46 |
22*30 0.5 |
25*25 0.5 |
||||||||
82 |
22*30 0.58 |
25*25 0.64 |
22*35 0.56 |
25*25 0.55 |
||||||||
100 |
22*30 0.64 |
25*25 0.67 |
30*20 0.59 |
22*40 0.64 |
25*30 0.57 |
30*25 0.64 |
30*25 0.50 |
|||||
120 |
22*35 0.72 |
25*30 0.72 |
30*25 0.76 |
22*45 0.72 |
25*35 0.71 |
30*25 0.70 |
||||||
150 |
22*40 0.82 |
25*35 0.84 |
30*25 0.84 |
35*20 0.76 |
22*50 0.79 |
25*40 0.75 |
30*30 0.74 |
35*25 0.75 |
22*50 0.66 |
30*30 0.64 |
||
180 |
22*50 0.95 |
25*40 0.94 |
30*30 0.92 |
35*25 0.94 |
25*45 0.84 |
30*35 0.87 |
35*30 0.90 |
|||||
220 |
25*45 1.07 |
30*35 1.06 |
35*30 1.08 |
25*50 0.98 |
35*40 0.98 |
35*30 1.00 |
||||||
270 |
25*50 1.21 |
30*40 1.21 |
35*30 1.20 |
35*45 1.15 |
35*35 1.17 |
|||||||
330 |
25*45 1.08 |
30*45 1.39 |
35*35 1.35 |
35*50 1.38 |
35*40 1.38 |
|||||||
390 |
30*50 1.55 |
35*40 1.54 |
35*45 1.55 |
|||||||||
470 |
35*45 1.74 |
35*50 1.72 |
||||||||||
560 |
35*35 1.42 |
|||||||||||
680 |
35*50 1.78 |
35*60 1.85 |
||||||||||
1000 |
35*70 2.3 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1500 |
0.16 |
270 |
8*9.5 |
43.2 |
26 |
2000 |
0.16 |
|
470 |
10*9.5 |
75.2 |
21 |
2600 |
0.16 |
|
560 |
10*11.5 |
89.6 |
15 |
3000 |
0.16 |
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1400 |
0.16 |
150 |
8*9.5 |
37.5 |
27 |
1900 |
0.16 |
|
270 |
10*9.5 |
67.5 |
22 |
2500 |
0.16 |
|
330 |
10*11.5 |
82.5 |
16 |
2900 |
0.16 |
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
1300 |
0.16 |
100 |
8*9.5 |
35 |
30 |
1800 |
0.16 |
|
150 |
10*9.5 |
52.5 |
23 |
2400 |
0.16 |
|
220 |
10*11.5 |
77 |
17 |
2800 |
0.16 |
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
1200 |
0.16 |
56 |
8*9.5 |
22.4 |
32 |
1700 |
0.16 |
|
100 |
10*9.5 |
40 |
24 |
2400 |
0.16 |
|
120 |
10*11.5 |
48 |
18 |
2700 |
0.16 |
|
50 |
15 |
6.3*7.2 |
10 |
80 |
1200 |
0.16 |
33 |
8*9.5 |
16.5 |
35 |
1600 |
0.16 |
|
56 |
10*9.5 |
28 |
25 |
2300 |
0.16 |
|
82 |
10*11.5 |
41 |
19 |
2600 |
0.16 |
|
63 |
10 |
6.3*7.2 |
10 |
100 |
1000 |
0.16 |
22 |
8*9.5 |
13.86 |
40 |
1500 |
0.16 |
|
33 |
8*9.5 |
20.79 |
40 |
1500 |
0.16 |
|
33 |
10*9.5 |
20.79 |
30 |
2100 |
0.16 |
|
47 |
10*9.5 |
29.61 |
30 |
2100 |
0.16 |
|
56 |
10*11.5 |
35.28 |
22 |
2400 |
0.16 |
|
80 |
12 |
10*9.5 |
10 |
70 |
1600 |
0.16 |
15 |
10*9.5 |
12 |
70 |
1600 |
0.16 |
|
18 |
10*11.5 |
14.4 |
50 |
1800 |
0.16 |
|
100 |
10 |
10*9.5 |
10 |
80 |
1400 |
0.16 |
12 |
10*9.5 |
12 |
80 |
1400 |
0.16 |
|
15 |
10*11.5 |
15 |
60 |
1600 |
0.16 |
|
125 |
10 |
10*9.5 |
12.5 |
90 |
1200 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for China OEM Aluminum Electrolytic Capacitor, Our customers mainly distributed while in the North America, Africa and Eastern Europe. we are able to offer high-quality goods with all the pretty competitive value.
China OEM China Start Capacitor and Motor Run Capacitor, Since its foundation , the company keeps living up to the belief of “honest selling , best quality , people-orientation and benefits to customers. ” We’re doing everything to supply our customers with best services and best products and solutions . We promise that we are going to be responsible all the way to the end once our services begin.