Chinese wholesale conductive polymer aluminum hybrid capacitors - 10000uf 35V Standard Soldering Snap In Capacitor KM Series – Holy
Chinese wholesale conductive polymer aluminum hybrid capacitors - 10000uf 35V Standard Soldering Snap In Capacitor KM Series – Holy Detail:
Specifications
Items |
Characteristics |
||||||||||||||||||||||
-40 ~ +105℃(6.3 ~ 100V.DC) |
-25 ~ +105℃(160~ 500V.DC) |
||||||||||||||||||||||
Category | |||||||||||||||||||||||
Temperature Range | |||||||||||||||||||||||
6.3 ~ 500V.DC |
|||||||||||||||||||||||
Rated Voltage Range | |||||||||||||||||||||||
Capacitance Tolerance |
±20%(M) (at 20℃,120Hz) |
||||||||||||||||||||||
Leakage Current |
I≤0.02CV (0.03CV for L=20mm )or 3μA , whichever is smaller (after 5 minutes application of rated voltage |
||||||||||||||||||||||
Note: I=Max,leakage current (μA), C=Nominal capacitance(μF), V=Rated voltage(V) (at 20℃) |
|||||||||||||||||||||||
Rate Voltage(V) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
80 |
100 |
160-250 |
315-400 |
450 |
500 |
||||||||||
tanδ(Max) |
0.60 |
0.50 |
0.40 |
0.30 |
0.25 |
0.20 |
0.15 |
0.15 |
0.15 |
0.15 |
0.20 |
0.20 |
0.24 |
||||||||||
Dissipation Factor | |||||||||||||||||||||||
When nominal capacitance exceeds 1000μF,add 0.02 to the value above for each 1000μF increase. (at 20℃,120HZ) | |||||||||||||||||||||||
Low TemperatureCharacteristics(Max,Impedance) | The impedance ratio shall not exceed the values listed in the table.(at 120Hz) | ||||||||||||||||||||||
Rated voltage (V) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
80 |
100 |
160-250 |
315-400 |
450 |
500 |
||||||||||
Z(-25℃)/Z(+20℃) |
4 |
4 |
4 |
3 |
3 |
2 |
2 |
2 |
2 |
4 |
4 |
8 |
10 |
||||||||||
Z (-40℃)/Z(+20℃) |
15 |
15 |
15 |
10 |
8 |
6 |
6 |
5 |
5 |
- |
- |
- |
– |
||||||||||
Endurance | |||||||||||||||||||||||
The following specifications shall be satisfied when the capacitors are restored to 20℃ after applied within Maximum allowable ripple current and not over rated voltage range after 2000 hours at 105℃ | |||||||||||||||||||||||
Capacitance change | ≦±20% of the initial value | ||||||||||||||||||||||
D.F.(tanδ) | ≦200% of the specified value | ||||||||||||||||||||||
Leakage current | ≦The specified value | ||||||||||||||||||||||
Shelf Life | The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 105℃ without voltage applied. | ||||||||||||||||||||||
Capacitance change | ≦±20% of the initial value | ||||||||||||||||||||||
D.F.(tanδ) | ≦150% of the specified value | ||||||||||||||||||||||
Leakage current | ≦200% of the specified value |
Dimensions (mm)
Rated Ripple Current Coefficient
Frequency (Hz) | 50 | 120 | 300 | 1k | 10k | 50k |
6.3~50V | 0.95 | 1 | 1.03 | 1.05 | 1.08 | 1.08 |
62~100V | 0.92 | 1 | 1.07 | 1.13 | 1.19 | 1.2 |
160~250V | 0.81 | 1 | 1.17 | 1.32 | 1.45 | 1.5 |
315~450V | 0.77 | 1 | 1.16 | 1.3 | 1.41 | 1.43 |
Standard Ratings
Cap.( μF) WV(V) |
6.3(0J) |
10(1A) |
16(1C) |
|||||||||
6800 |
22*25 1.57 |
|||||||||||
10000 |
22*25 1.55 |
22*30 1.97 |
25*25 1.97 |
|||||||||
12000 |
22*25 1.54 |
22*30 1.77 |
22*35 2.22 |
25*30 2.24 |
30*25 2.45 |
|||||||
15000 |
22*25 1.72 |
22*30 1.97 |
25*25 1.96 |
22*40 2.55 |
25*35 2.58 |
30*25 2.52 |
||||||
18000 |
22*30 1.95 |
25*25 1.96 |
22*35 2.21 |
25*30 2.23 |
22*45 2.87 |
25*40 2.92 |
30*30 2.88 |
35*25 2.92 |
||||
22000 |
22*35 2.23 |
25*30 2.25 |
30*25 2.28 |
22*40 2.51 |
25*35 2.54 |
35*25 2.40 |
25*45 3.32 |
30*35 3.29 |
35*25 3.23 |
|||
27000 |
22*40 2.54 |
25*35 2.57 |
30*25 2.52 |
22*50 2.93 |
25*40 2.90 |
30*30 2.87 |
35*25 2.73 |
25*50 3.78 |
30*40 3.77 |
35*30 3.45 |
||
33000 |
22*45 2.88 |
25*40 2.93 |
30*30 2.89 |
35*25 2.93 |
25*45 3.30 |
30*35 3.28 |
35*30 3.16 |
30*45 4.30 |
35*35 4.26 |
|||
39000 |
25*40 3.18 |
30*35 3.26 |
35*30 3.40 |
25*50 3.68 |
30*40 3.69 |
35*30 3.43 |
30*50 4.81 |
35*40 4.79 |
||||
47000 |
25*50 3.69 |
30*40 3.69 |
35*30 3.73 |
30*45 4.17 |
35*35 3.76 |
35*45 5.43 |
||||||
56000 |
30*45 4.16 |
35*35 4.12 |
30*50 4.68 |
35*40 4.67 |
||||||||
68000 |
30*50 4.71 |
35*40 4.69 |
35*50 5.46 |
|||||||||
82000 |
35*45 5.32 |
|||||||||||
Cap.( μF) WV(V) |
25(1E) |
35(1V) |
50(1H) |
|||||||||
1800 |
22*25 1.33 |
|||||||||||
2700 |
22*30 1.69 |
25*25 1.70 |
||||||||||
3300 |
22*25 1.40 |
22*35 1.93 |
25*30 1.85 |
|||||||||
3900 |
22*30 1.57 |
22*40 2.16 |
25*35 2.18 |
30*25 1.95 |
||||||||
4700 |
22*25 1.50 |
22*30 1.72 |
25*25 1.80 |
22*45 2.43 |
25*35 2.39 |
30*30 2.25 |
35*25 2.48 |
|||||
5600 |
22*25 1.63 |
22*35 1.95 |
25*30 1.96 |
35*25 1.99 |
22*50 2.75 |
22*40 2.70 |
30*35 2.76 |
35*25 2.70 |
||||
6800 |
22*30 1.86 |
25*25 1.87 |
22*40 2.20 |
25*35 2.23 |
30*25 2.19 |
25*50 3.30 |
30*40 3.30 |
35*30 3.25 |
||||
8200 |
22*35 2.11 |
25*30 2.12 |
30*25 2.15 |
22*50 2.53 |
25*40 2.53 |
30*30 2.75 |
35*25 2.75 |
30*45 3.60 |
35*35 3.55 |
|||
10000 |
22*40 2.39 |
25*35 2.42 |
30*25 2.37 |
25*45 2.87 |
30*35 2.90 |
35*30 2.91 |
30*50 4.04 |
35*40 4.03 |
||||
12000 |
22*45 2.69 |
25*40 2.74 |
30*30 2.70 |
35*25 2.74 |
25*50 3.24 |
30*40 3.23 |
35*30 2.99 |
35*45 4.55 |
||||
15000 |
25*45 3.15 |
30*35 3.13 |
35*30 3.27 |
30*45 3.72 |
35*35 3.67 |
|||||||
18000 |
25*50 3.54 |
30*40 3.54 |
35*30 3.58 |
35*40 4.37 |
||||||||
22000 |
30*45 4.04 |
35*35 3.64 |
35*50 4.92 |
|||||||||
27000 |
35*45 4.73 |
|||||||||||
33000 |
35*50 5.39 |
Standard Ratings
Cap.( μF) WV(V) |
6.3(1J) |
80(1k) |
100(2A) |
|||||||||
560 |
22*25 1.05 |
|||||||||||
820 |
22*25 1.11 |
22*30 1.32 |
25*25 1.33 |
|||||||||
1000 |
22*25 1.22 |
22*35 1.50 |
25*30 1.51 |
|||||||||
1200 |
22*25 1.19 |
22*30 1.38 |
25*25 1.39 |
22*40 1.69 |
25*35 1.71 |
30*25 1.68 |
||||||
1500 |
22*25 1.33 |
22*35 1.59 |
25*30 1.61 |
22*45 1.94 |
25*40 1.98 |
30*25 1.95 |
35*25 1.98 |
|||||
1800 |
22*30 1.51 |
25*25 1.52 |
22*40 1.80 |
25*30 1.76 |
30*25 1.65 |
25*45 2.23 |
30*30 2.50 |
35*25 2.17 |
||||
2200 |
22*35 1.73 |
25*30 1.74 |
30*25 1.50 |
22*45 2.04 |
25*35 2.01 |
30*30 2.05 |
35*25 2.07 |
25*50 2.53 |
30*40 2.70 |
35*30 2.50 |
||
2700 |
22*40 1.97 |
25*35 1.99 |
30*25 1.76 |
25*45 23.6 |
30*35 2.35 |
35*25 2.29 |
30*45 2.88 |
35*35 2.86 |
||||
3300 |
22*50 2.29 |
25*40 2.27 |
30*30 2.24 |
35*25 2.06 |
25*50 2.68 |
30*40 2.68 |
35*30 2.45 |
30*50 3.28 |
35*40 3.27 |
|||
3900 |
25*45 2.54 |
30*35 2.55 |
35*25 32.24 |
30*45 3.00 |
35*35 2.98 |
35*45 3.67 |
||||||
4700 |
25*50 2.86 |
30*40 2.86 |
35*30 2.79 |
30*50 3.39 |
35*40 3.38 |
35*50 3.80 |
||||||
5600 |
30*45 3.22 |
35*35 3.19 |
35*45 3.80 |
|||||||||
6800 |
30*50 3.65 |
35*40 3.64 |
35*50 3.90 |
|||||||||
8200 |
35*45 3.90 |
|||||||||||
10000 |
35*50 4.40 |
|||||||||||
Cap.( μF) WV(V) |
160(2C) |
180(2Z) |
200(2D) |
|||||||||
150 |
22*20 0.66 |
|||||||||||
180 |
22*20 0.73 |
22*20 0.72 |
||||||||||
220 |
22*20 0.8 |
22*20 0.80 |
22*25 0.79 |
25*20 0.83 |
||||||||
270 |
22*25 1.09 |
22*25 0.96 |
25*20 0.92 |
22*25 0.87 |
25*25 1.09 |
|||||||
330 |
22*25 1.20 |
25*20 1.02 |
22*25 1.06 |
25*25 1.20 |
22*30 1.20 |
25*25 1.21 |
30*20 1.08 |
|||||
390 |
22*30 1.30 |
25*25 1.28 |
30*20 1.17 |
22*30 1.30 |
25*25 1.30 |
35*20 1.17 |
22*35 1.31 |
25*25 1.31 |
30*25 1.37 |
|||
470 |
22*35 1.40 |
25*25 1.41 |
30*20 1.28 |
22*35 1.35 |
25*30 1.40 |
30*25 1.38 |
35*20 1.41 |
22*40 1.40 |
25*30 1.41 |
30*25 1.50 |
35*20 1.41 |
|
560 |
22*40 1.50 |
25*30 1.51 |
30*25 1.56 |
35*20 1.54 |
22*40 1.51 |
25*35 1.53 |
30*25 1.51 |
35*20 1.53 |
22*45 1.56 |
25*35 1.53 |
30*25 1.63 |
35*25 1.56 |
680 |
22*45 1.71 |
25*35 1.70 |
30*25 1.72 |
35*20 1.70 |
22*45 1.71 |
25*40 1.74 |
30*30 1.72 |
35*25 1.74 |
22*50 1.74 |
25*40 1.74 |
30*30 1.74 |
35*25 1.72 |
820 |
22*50 1.93 |
25*40 2.01 |
30*30 2.00 |
35*25 1.91 |
22*50 1.97 |
25*45 1.97 |
30*35 2.00 |
35*25 1.91 |
25*50 2.04 |
30*35 2.00 |
35*30 2.04 |
|
1000 |
25*45 2.20 |
30*35 2.22 |
35*25 2.21 |
25*50 2.23 |
30*40 2.24 |
35*30 2.26 |
30*45 2.30 |
35*35 2.30 |
||||
1200 |
25*50 2.45 |
30*40 2.44 |
35*30 2.44 |
30*45 2.52 |
35*35 2.50 |
30*50 2.60 |
35*40 2.65 |
|||||
1500 |
30*45 2.82 |
35*35 2.50 |
30*50 2.89 |
35*40 2.89 |
35*45 3.08 |
|||||||
1800 |
30*50 3.31 |
35*45 3.31 |
35*40 3.17 |
35*50 3.47 |
||||||||
2200 |
35*50 3.77 |
35*50 3.60 |
Standard Ratings
Cap.( μF) WV(V) |
250(2E) |
315(2F) |
350(2V) |
|||||||||
56 |
22*20 0.4 |
|||||||||||
68 |
22*20 0.44 |
22*25 0.51 |
||||||||||
82 |
22*25 0.64 |
22*25 0.56 |
25*20 0.51 |
|||||||||
100 |
22*30 0.68 |
25*20 0.56 |
22*30 0.69 |
25*25 0.69 |
30*20 0.59 |
|||||||
120 |
22*20 0.59 |
22*30 0.75 |
25*25 0.76 |
30*20 0.65 |
22*35 0.75 |
25*25 0.75 |
30*20 0.64 |
|||||
150 |
22*25 0.71 |
22*35 0.82 |
25*30 0.80 |
30*25 0.82 |
22*40 0.82 |
25*30 0.83 |
30*25 0.83 |
35*20 0.76 |
||||
180 |
22*25 0.78 |
25*20 0.75 |
22*40 0.91 |
25*30 0.88 |
30*25 0.90 |
35*20 0.83 |
22*45 0.92 |
25*35 0.92 |
30*25 0.91 |
35*25 0.94 |
||
220 |
22*30 0.95 |
25*25 0.95 |
30*20 0.88 |
22*45 1.02 |
25*35 1.02 |
30*30 1.02 |
35*25 1.03 |
22*50 1.05 |
25*40 1.04 |
30*30 1.02 |
35*25 1.04 |
|
270 |
22*35 1.14 |
25*25 1.05 |
30*20 0.97 |
22*50 1.16 |
25*40 1.15 |
30*35 1.17 |
35*25 1.15 |
25*45 1.18 |
30*35 1.17 |
35*30 1.20 |
||
330 |
22*40 1.26 |
25*30 1.20 |
30*25 1.26 |
35*20 1.18 |
25*50 1.33 |
30*35 1.30 |
35*30 1.32 |
30*40 1.34 |
35*30 1.33 |
|||
390 |
22*45 1.49 |
25*35 1.49 |
30*25 1.37 |
35*25 1.43 |
30*40 1.46 |
35*35 1.47 |
30*45 1.51 |
35*35 1.47 |
||||
470 |
22*50 1.57 |
25*40 1.57 |
30*30 1.57 |
35*25 1.57 |
30*50 1.70 |
35*40 1.69 |
35*40 1.69 |
|||||
560 |
22*45 1.79 |
30*35 1.79 |
35*25 1.62 |
35*30 1.79 |
35*45 1.90 |
35*45 1.90 |
||||||
680 |
25*50 1.84 |
30*40 2.00 |
35*30 1.97 |
35*50 2.15 |
||||||||
820 |
30*45 2.16 |
35*35 1.98 |
||||||||||
1000 |
35*40 2.30 |
|||||||||||
1200 |
35*45 2.43 |
|||||||||||
Cap.( μF) WV(V) |
400(2G) |
450(2W) |
500(2H) |
|||||||||
47 |
22*20 0.37 |
|||||||||||
56 |
22*20 0.4 |
22*25 0.4 |
||||||||||
68 |
22*25 0.51 |
25*20 0.46 |
22*30 0.5 |
25*25 0.5 |
||||||||
82 |
22*30 0.58 |
25*25 0.64 |
22*35 0.56 |
25*25 0.55 |
||||||||
100 |
22*30 0.64 |
25*25 0.67 |
30*20 0.59 |
22*40 0.64 |
25*30 0.57 |
30*25 0.64 |
30*25 0.50 |
|||||
120 |
22*35 0.72 |
25*30 0.72 |
30*25 0.76 |
22*45 0.72 |
25*35 0.71 |
30*25 0.70 |
||||||
150 |
22*40 0.82 |
25*35 0.84 |
30*25 0.84 |
35*20 0.76 |
22*50 0.79 |
25*40 0.75 |
30*30 0.74 |
35*25 0.75 |
22*50 0.66 |
30*30 0.64 |
||
180 |
22*50 0.95 |
25*40 0.94 |
30*30 0.92 |
35*25 0.94 |
25*45 0.84 |
30*35 0.87 |
35*30 0.90 |
|||||
220 |
25*45 1.07 |
30*35 1.06 |
35*30 1.08 |
25*50 0.98 |
35*40 0.98 |
35*30 1.00 |
||||||
270 |
25*50 1.21 |
30*40 1.21 |
35*30 1.20 |
35*45 1.15 |
35*35 1.17 |
|||||||
330 |
25*45 1.08 |
30*45 1.39 |
35*35 1.35 |
35*50 1.38 |
35*40 1.38 |
|||||||
390 |
30*50 1.55 |
35*40 1.54 |
35*45 1.55 |
|||||||||
470 |
35*45 1.74 |
35*50 1.72 |
||||||||||
560 |
35*35 1.42 |
|||||||||||
680 |
35*50 1.78 |
35*60 1.85 |
||||||||||
1000 |
35*70 2.3 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1500 |
0.16 |
270 |
8*9.5 |
43.2 |
26 |
2000 |
0.16 |
|
470 |
10*9.5 |
75.2 |
21 |
2600 |
0.16 |
|
560 |
10*11.5 |
89.6 |
15 |
3000 |
0.16 |
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1400 |
0.16 |
150 |
8*9.5 |
37.5 |
27 |
1900 |
0.16 |
|
270 |
10*9.5 |
67.5 |
22 |
2500 |
0.16 |
|
330 |
10*11.5 |
82.5 |
16 |
2900 |
0.16 |
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
1300 |
0.16 |
100 |
8*9.5 |
35 |
30 |
1800 |
0.16 |
|
150 |
10*9.5 |
52.5 |
23 |
2400 |
0.16 |
|
220 |
10*11.5 |
77 |
17 |
2800 |
0.16 |
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
1200 |
0.16 |
56 |
8*9.5 |
22.4 |
32 |
1700 |
0.16 |
|
100 |
10*9.5 |
40 |
24 |
2400 |
0.16 |
|
120 |
10*11.5 |
48 |
18 |
2700 |
0.16 |
|
50 |
15 |
6.3*7.2 |
10 |
80 |
1200 |
0.16 |
33 |
8*9.5 |
16.5 |
35 |
1600 |
0.16 |
|
56 |
10*9.5 |
28 |
25 |
2300 |
0.16 |
|
82 |
10*11.5 |
41 |
19 |
2600 |
0.16 |
|
63 |
10 |
6.3*7.2 |
10 |
100 |
1000 |
0.16 |
22 |
8*9.5 |
13.86 |
40 |
1500 |
0.16 |
|
33 |
8*9.5 |
20.79 |
40 |
1500 |
0.16 |
|
33 |
10*9.5 |
20.79 |
30 |
2100 |
0.16 |
|
47 |
10*9.5 |
29.61 |
30 |
2100 |
0.16 |
|
56 |
10*11.5 |
35.28 |
22 |
2400 |
0.16 |
|
80 |
12 |
10*9.5 |
10 |
70 |
1600 |
0.16 |
15 |
10*9.5 |
12 |
70 |
1600 |
0.16 |
|
18 |
10*11.5 |
14.4 |
50 |
1800 |
0.16 |
|
100 |
10 |
10*9.5 |
10 |
80 |
1400 |
0.16 |
12 |
10*9.5 |
12 |
80 |
1400 |
0.16 |
|
15 |
10*11.5 |
15 |
60 |
1600 |
0.16 |
|
125 |
10 |
10*9.5 |
12.5 |
90 |
1200 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:


Related Product Guide:
Sticking to your belief of "Creating solutions of high quality and generating buddies with people from all around the world", we always put the fascination of customers to start with for Chinese wholesale conductive polymer aluminum hybrid capacitors - 10000uf 35V Standard Soldering Snap In Capacitor KM Series – Holy , The product will supply to all over the world, such as: Mexico, Houston, Croatia, Our products are mainly exported to Southeast Asia, the Middle East, North America and Europe. Our quality is surely guaranteed. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
