Fast delivery 7.5V Ultra capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy
Fast delivery 7.5V Ultra capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 16 ~ 125 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
|
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
|
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
|
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
|
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) |
Rated ripple current (mArms/125℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1100 |
0.16 |
|
270 |
8*10.5 |
43.2 |
26 |
1500 |
0.16 |
|
|
470 |
10*10.5 |
75.2 |
21 |
2000 |
0.16 |
|
|
560 |
10*12.5 |
89.6 |
15 |
2300 |
0.16 |
|
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1000 |
0.16 |
|
150 |
8*10.5 |
37.5 |
27 |
1300 |
0.16 |
|
|
270 |
10*10.5 |
67.5 |
22 |
1500 |
0.16 |
|
|
330 |
10*12.5 |
82.5 |
16 |
1700 |
0.16 |
|
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
900 |
0.16 |
|
100 |
8*10.5 |
35 |
30 |
1200 |
0.16 |
|
|
150 |
10*10.5 |
52.5 |
23 |
1400 |
0.16 |
|
|
220 |
10*12.5 |
77 |
17 |
1700 |
0.16 |
|
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
900 |
0.16 |
|
56 |
8*10.5 |
22.4 |
32 |
1200 |
0.16 |
|
|
100 |
10*10.5 |
40 |
24 |
1400 |
0.16 |
|
|
120 |
10*12.5 |
48 |
18 |
1600 |
0.16 |
|
|
50 |
15 |
6.3*7.7 |
10 |
80 |
800 |
0.16 |
|
33 |
8*10.5 |
16.5 |
35 |
1100 |
0.16 |
|
|
56 |
10*10.5 |
28 |
25 |
1300 |
0.16 |
|
|
82 |
10*12.5 |
41 |
19 |
1500 |
0.16 |
|
|
63 |
10 |
6.3*7.7 |
10 |
100 |
700 |
0.16 |
|
22 |
8*10.5 |
13.86 |
40 |
1000 |
0.16 |
|
|
33 |
8*10.5 |
20.79 |
40 |
1000 |
0.16 |
|
|
33 |
10*10.5 |
20.79 |
30 |
1200 |
0.16 |
|
|
47 |
10*10.5 |
29.61 |
30 |
1200 |
0.16 |
|
|
56 |
10*12.5 |
35.28 |
22 |
1400 |
0.16 |
|
|
80 |
12 |
10*10.5 |
10 |
70 |
900 |
0.16 |
|
15 |
10*10.5 |
12 |
70 |
900 |
0.16 |
|
|
18 |
10*12.5 |
14.4 |
50 |
1100 |
0.16 |
|
|
100 |
10 |
10*10.5 |
10 |
80 |
800 |
0.16 |
|
12 |
10*10.5 |
12 |
80 |
800 |
0.16 |
|
|
15 |
10*12.5 |
15 |
60 |
1000 |
0.16 |
|
|
125 |
10 |
10*10.5 |
12.5 |
90 |
700 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
TB Series
●Low ESR
● High Voltage, Long Life
● 125℃,2,000~4,000hrs
● RoHS compliant
Items
Characteristics
Category
Temperature Range
-55 ~ +125℃
Rated Voltage Range
16 ~ 125 V
Capacitance tolerance
±20%(M) (at 20℃,120Hz)
Leakage Current
After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor
Less than or equal to the specified
(at 20℃,120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-55℃)/Z(+20℃)
≤0.75 to 1.5
(100KHz)
Z(+125℃)/Z(+20℃)
≤0.75 to 2.0
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Damp Heat
(Steady State)
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH.
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Surge Voltage
Surge Voltage=Rated voltage * 1.15(V)
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, have confidence in the very first and management the advanced" for Fast delivery 7.5V Ultra capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy , The product will supply to all over the world, such as: Dubai, United Arab emirates, moldova, With a state-of-the-art comprehensive marketing feedback system and 300 skilled workers' hard work, our company has developed all kinds of products ranging from high class, medium class to low class. This whole selection of fine products offers our customers different choices. Besides, our company sticks to high quality and reasonable price, and we also offer good OEM services to many famous brands.
By Andrew Forrest from Pakistan - 2017.08.15 12:36
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Ophelia from Turin - 2017.08.18 11:04
