High Performance solid electrolytic capacitors factory - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy
High Performance solid electrolytic capacitors factory - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 16 ~ 50 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
|
ΦD |
6.3 |
8 |
10 |
10 |
|
L |
L+1.5Max |
|||
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
|
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
|
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
|
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
|
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
|
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:
Related Product Guide:
Our pursuit and firm aim should be to "Always fulfill our buyer requirements". We carry on to produce and structure top-quality excellent solutions for equally our aged and new consumers and accomplish a win-win prospect for our consumers as well as us for High Performance solid electrolytic capacitors factory - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy , The product will supply to all over the world, such as: Netherlands, Albania, Georgia, With more and more Chinese products around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to offer you both better products and service, because we are more and more powerful, professional and experience in domestic and international.
By Hazel from Finland - 2017.08.18 18:38
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Teresa from Ireland - 2017.12.31 14:53
Write your message here and send it to us
