High Performance solid electrolytic capacitors factory - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy
High Performance solid electrolytic capacitors factory - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 35 ~ 250 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 10000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
35 |
22 |
6.3*8 |
0.12 |
87 |
600 |
33 |
6.3*8 |
0.12 |
62 |
920 |
|
47 |
8*8 |
0.12 |
87 |
1150 |
|
150 |
8*12 |
0.12 |
62 |
1850 |
|
220 |
10*12 |
0.12 |
47 |
2500 |
|
50 |
22 |
6.3*8 |
0.12 |
65 |
1400 |
47 |
8*12 |
0.12 |
31 |
1500 |
|
68 |
10*12 |
0.12 |
26 |
1800 |
|
120 |
10*12 |
0.12 |
25 |
2200 |
|
63 |
22 |
8*8 |
0.12 |
72 |
900 |
33 |
8*12 |
0.12 |
65 |
1200 |
|
82 |
10*12 |
0.12 |
42 |
2100 |
|
80 |
10 |
8*8 |
0.12 |
45 |
950 |
12 |
8*12 |
0.12 |
43 |
1500 |
|
22 |
10*12 |
0.12 |
38 |
1800 |
|
100 |
15 |
8*12 |
0.12 |
44 |
1100 |
22 |
10*12 |
0.12 |
37 |
1500 |
|
33 |
10*12 |
0.12 |
37 |
1800 |
|
160 |
10 |
8*12 |
0.12 |
97 |
950 |
15 |
10*12 |
0.12 |
82 |
1100 |
|
22 |
10*12 |
0.12 |
77 |
1500 |
|
200 |
8.2 |
8*12 |
0.12 |
107 |
700 |
15 |
10*12 |
0.12 |
107 |
850 |
|
220 (2P) |
6.8 |
8*12 |
0.12 |
107 |
550 |
10 |
10*12 |
0.12 |
107 |
750 |
|
250 |
3.3 |
8*12 |
0.12 |
472 |
300 |
6.8 |
10*12 |
0.12 |
444 |
350 |
|
8.2 |
10*12 |
0.12 |
409 |
500 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Product detail pictures:


Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of High Performance solid electrolytic capacitors factory - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy , The product will supply to all over the world, such as: Greece, Costa Rica, Oman, At present our sales network is growing continually, improving service quality to meet customer's demand. If you are interested in any products , please contact us at anytime. We are looking forward to forming successful business relationships with you in near future.

Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
