Hot-selling 5.5V Ultracapacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy
Hot-selling 5.5V Ultracapacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 125 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*10.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*10.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*12.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1000 |
0.16 |
150 |
8*10.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*10.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*12.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
900 |
0.16 |
100 |
8*10.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*10.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*12.5 |
77 |
17 |
1700 |
0.16 |
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
900 |
0.16 |
56 |
8*10.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*10.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*12.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.7 |
10 |
80 |
800 |
0.16 |
33 |
8*10.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*10.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*12.5 |
41 |
19 |
1500 |
0.16 |
|
63 |
10 |
6.3*7.7 |
10 |
100 |
700 |
0.16 |
22 |
8*10.5 |
13.86 |
40 |
1000 |
0.16 |
|
33 |
8*10.5 |
20.79 |
40 |
1000 |
0.16 |
|
33 |
10*10.5 |
20.79 |
30 |
1200 |
0.16 |
|
47 |
10*10.5 |
29.61 |
30 |
1200 |
0.16 |
|
56 |
10*12.5 |
35.28 |
22 |
1400 |
0.16 |
|
80 |
12 |
10*10.5 |
10 |
70 |
900 |
0.16 |
15 |
10*10.5 |
12 |
70 |
900 |
0.16 |
|
18 |
10*12.5 |
14.4 |
50 |
1100 |
0.16 |
|
100 |
10 |
10*10.5 |
10 |
80 |
800 |
0.16 |
12 |
10*10.5 |
12 |
80 |
800 |
0.16 |
|
15 |
10*12.5 |
15 |
60 |
1000 |
0.16 |
|
125 |
10 |
10*10.5 |
12.5 |
90 |
700 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
TB Series
●Low ESR
● High Voltage, Long Life
● 125℃,2,000~4,000hrs
● RoHS compliant
Items
Characteristics
Category
Temperature Range
-55 ~ +125℃
Rated Voltage Range
16 ~ 125 V
Capacitance tolerance
±20%(M) (at 20℃,120Hz)
Leakage Current
After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor
Less than or equal to the specified
(at 20℃,120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-55℃)/Z(+20℃)
≤0.75 to 1.5
(100KHz)
Z(+125℃)/Z(+20℃)
≤0.75 to 2.0
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Damp Heat
(Steady State)
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH.
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Surge Voltage
Surge Voltage=Rated voltage * 1.15(V)
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Product detail pictures:

Related Product Guide:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our management ideal for Hot-selling 5.5V Ultracapacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy , The product will supply to all over the world, such as: Malta, Honduras, Suriname, We'll initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products and solutions or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future.

Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
