Hot Selling for Aluminum Electrolytic Capacitor (Start capacitor)
The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations for Hot Selling for Aluminum Electrolytic Capacitor (Start capacitor), Should you pursuit the Hi-quality, Hi-stable, Aggressive price tag parts, business name is your most effective choice!
The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations for , Our goods are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 50 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
ΦD |
6.3 |
8 |
10 |
10 |
L |
L+1.5Max |
|||
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations for Hot Selling for Aluminum Electrolytic Capacitor (Start capacitor), Should you pursuit the Hi-quality, Hi-stable, Aggressive price tag parts, business name is your most effective choice!
Hot Selling for , Our goods are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!