Hot Selling for China 0603 12PF 50V SMD Film Electronic Capacitor Chip SMD Capacitor
Our solutions are commonly regarded and trusted by users and can fulfill continuously developing financial and social demands for Hot Selling for China 0603 12PF 50V SMD Film Electronic Capacitor Chip SMD Capacitor, Our company is dedicated to providing customers with high and stable quality products at competitive price, making every customer satisfied with our products and services.
Our solutions are commonly regarded and trusted by users and can fulfill continuously developing financial and social demands for Ceramic Chip Capacitor, China Capacitor Chip SMD Capacitor, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows “Survive by good quality, Develop by keeping good credit. ” operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
Specifications
| Items | Characteristics | |||||
| CategoryTemperature Range | -55 ~ +125℃ | |||||
| Rated Voltage Range | 2.5 ~ 25V | |||||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | |||||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | |||||
| Dissipation Factor | Rated voltage (V) | 2.5～4 | 6.3 | 10~16 | 20~25 | (at 20℃,120Hz) |
| tanδ (Max.) | 0.18 | 0.15 | 0.12 | 0.15 | ||
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) | |||
| Z(-55℃)/Z(+20℃) | ≤1.25 | |||||
| Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | |||||
| Appearance | No significant damage | |||||
| Capacitance change | ≦±20% of the initial value | |||||
| D.F.(tanδ) | ≦150% of the specified value | |||||
| ESR | ≦150% of the specified value | |||||
| Leakage current | ≦The specified value | |||||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | |||||
| Appearance | No significant damage | |||||
| Capacitance change | ≦±20% of the initial value | |||||
| D.F.(tanδ) | ≦150% of the specified value | |||||
| ESR | ≦150% of the specified value | |||||
| Leakage current | ≦The specified value | |||||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | |||||
| Appearance | No significant damage | |||||
| Capacitance change | ≦±20% of the initial value | |||||
| D.F.(tanδ) | ≦150% of the specified value | |||||
| ESR | ≦150% of the specified value | |||||
| Leakage current | ≦The specified value | |||||
Dimensions (mm)
|
ΦD |
5 |
6.3 |
8 |
10 |
|
P |
2 |
2.5 |
3.5 |
5 |
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
ɑ |
L<16mm：1.0 |
|||
|
L≧16mm：2.0 |
||||
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size |
ESR(mΩ)at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
|
2.5 4 |
560 |
8*12 |
13 |
4600 |
|
820 |
8*12 |
13 |
4600 |
|
|
1200 |
10*12 |
13 |
5400 |
|
|
560 |
8*12 |
13 |
4600 |
|
|
6.3 (OJ) |
820 |
10*12 |
13 |
5400 |
|
1200 |
10*12 |
13 |
5400 |
|
|
470 |
8*12 |
15 |
4300 |
|
|
680 |
8*12 |
15 |
4300 |
|
|
7.5 (OP) 10 |
820 |
10*12 |
12 |
5400 |
|
500 |
6.3*8 |
15 |
4300 |
|
|
680 |
8*8 |
15 |
4300 |
|
|
820 |
10*12 |
12 |
5400 |
|
|
220 |
8*12 |
18 |
4000 |
|
|
470 |
8*12 |
18 |
4000 |
|
|
16 (1C) |
560 |
10*12 |
14 |
5400 |
|
820 |
8*12 |
12 |
5100 |
|
|
1500 |
10*12 |
12 |
5100 |
|
|
180 |
8*12 |
18 |
3500 |
|
|
20 (1D) |
220 |
8*12 |
18 |
3500 |
|
330 |
10*12 |
16 |
4600 |
|
|
100 |
8*12 |
24 |
3500 |
|
|
25 (1E) |
150 |
10*12 |
20 |
4300 |
|
22 |
8*12 |
65 |
1200 |
|
|
47 |
8*12 |
55 |
1900 |
|
|
220 |
8*12 |
40 |
2100 |
Rated Ripple Current Coefficient
|
Frequency (Hz) |
120Hz≤f＜1kHz |
1kHz≤f＜10kHz |
10kHz≤f＜100kHz |
100kHz≤f＜500kHz |
| Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Our solutions are commonly regarded and trusted by users and can fulfill continuously developing financial and social demands for Hot Selling for China 0603 12PF 50V SMD Film Electronic Capacitor Chip SMD Capacitor, Our company is dedicated to providing customers with high and stable quality products at competitive price, making every customer satisfied with our products and services.
Hot Selling for China Capacitor Chip SMD Capacitor, Ceramic Chip Capacitor, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows “Survive by good quality, Develop by keeping good credit. ” operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
