Manufactur standard AC 220V Factory Direct Sale DC 29.4V 70A 2200W Charger for 7s 24V 25.9V Li-ion/Lithium Polymer Battery
“Based on domestic market and expand abroad business” is our improvement strategy for Manufactur standard AC 220V Factory Direct Sale DC 29.4V 70A 2200W Charger for 7s 24V 25.9V Li-ion/Lithium Polymer Battery, We often concertrating on creating new creative solution to meet request from our customers everywhere in the planet. Sign up for us and let’s make driving safer and funnier with each other!
“Based on domestic market and expand abroad business” is our improvement strategy for China Li-ion Battery Charger and Lithium Battery Charger price, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 2.5 ~ 25V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Rated voltage (V) | 2.5~25 | (at 20℃,120Hz) |
tanδ (Max.) | 0.12 | ||
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 10000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
◆ Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size |
ESR(mΩ) |
Rated ripple current (mArms/105℃/100kHz) |
2.5 |
680 |
8*12 |
10 |
5024 |
820 |
8*12 |
10 |
5024 |
|
1500 |
10*12 |
10 |
5279 |
|
4 |
560 |
8*12 |
10 |
5024 |
1200 |
10*12 |
10 |
5279 |
|
6.3 |
680 |
8*12 |
12 |
4544 |
820 |
10*12 |
10 |
5279 |
|
1000 |
10*12 |
8 |
5090 |
|
1500 |
10*12 |
10 |
8279 |
|
10 |
270 |
8*12 |
13 |
4166 |
560 |
8*12 |
10 |
5279 |
|
820 |
10*12 |
10 |
5750 |
|
1000 |
8*12 |
12 |
4242 |
|
1000 |
10*12 |
10 |
5750 |
|
1500 |
10*12 |
10 |
5750 |
|
16 |
270 |
8*12 |
13 |
4525 |
330 |
8*12 |
13 |
4525 |
|
470 |
8*12 |
13 |
4525 |
|
560 |
10*12 |
13 |
4525 |
|
1000 |
10*12 |
13 |
4525 |
|
20 |
100 |
8*12 |
30 |
2592 |
150 |
10*12 |
25 |
2734 |
|
25 |
47 |
8*12 |
24 |
2500 |
68 |
8*12 |
24 |
2500 |
|
100 |
8*12 |
25 |
2500 |
|
220 |
10*12 |
15 |
3500 |
◆ Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
Coefficient | 0.05 | 0.30 | 0.70 | 1.00 |
“Based on domestic market and expand abroad business” is our improvement strategy for Manufactur standard AC 220V Factory Direct Sale DC 29.4V 70A 2200W Charger for 7s 24V 25.9V Li-ion/Lithium Polymer Battery, We often concertrating on creating new creative solution to meet request from our customers everywhere in the planet. Sign up for us and let’s make driving safer and funnier with each other!
Manufactur standard China Li-ion Battery Charger and Lithium Battery Charger price, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.