Manufacturer for Snap-in Ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy
Manufacturer for Snap-in Ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 16 ~ 125 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+105℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 to 10,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1500 |
0.16 |
270 |
8*10.5 |
43.2 |
26 |
2000 |
0.16 |
|
470 |
10*10.5 |
75.2 |
21 |
2600 |
0.16 |
|
560 |
10*12.5 |
89.6 |
15 |
3000 |
0.16 |
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1400 |
0.16 |
150 |
8*10.5 |
37.5 |
27 |
1900 |
0.16 |
|
270 |
10*10.5 |
67.5 |
22 |
2500 |
0.16 |
|
330 |
10*12.5 |
82.5 |
16 |
2900 |
0.16 |
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
1300 |
0.16 |
100 |
8*10.5 |
35 |
30 |
1800 |
0.16 |
|
150 |
10*10.5 |
52.5 |
23 |
2400 |
0.16 |
|
220 |
10*12.5 |
77 |
17 |
2800 |
0.16 |
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
1200 |
0.16 |
56 |
8*10.5 |
22.4 |
32 |
1700 |
0.16 |
|
100 |
10*10.5 |
40 |
24 |
2400 |
0.16 |
|
120 |
10*12.5 |
48 |
18 |
2700 |
0.16 |
|
50 |
15 |
6.3*7.7 |
10 |
80 |
1200 |
0.16 |
33 |
8*10.5 |
16.5 |
35 |
1600 |
0.16 |
|
56 |
10*10.5 |
28 |
25 |
2300 |
0.16 |
|
82 |
10*12.5 |
41 |
19 |
2600 |
0.16 |
|
63 |
10 |
6.3*7.7 |
10 |
100 |
1000 |
0.16 |
22 |
8*10.5 |
13.86 |
40 |
1500 |
0.16 |
|
33 |
8*10.5 |
20.79 |
40 |
1500 |
0.16 |
|
33 |
10*10.5 |
20.79 |
30 |
2100 |
0.16 |
|
47 |
10*10.5 |
29.61 |
30 |
2100 |
0.16 |
|
56 |
10*12.5 |
35.28 |
22 |
2400 |
0.16 |
|
80 |
12 |
10*10.5 |
10 |
70 |
1600 |
0.16 |
15 |
10*10.5 |
12 |
70 |
1600 |
0.16 |
|
18 |
10*12.5 |
14.4 |
50 |
1800 |
0.16 |
|
100 |
10 |
10*10.5 |
10 |
80 |
1400 |
0.16 |
12 |
10*10.5 |
12 |
80 |
1400 |
0.16 |
|
15 |
10*12.5 |
15 |
60 |
1600 |
0.16 |
|
125 |
10 |
10*10.5 |
12.5 |
90 |
1200 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:

Related Product Guide:
Our purpose is to fulfill our clients by offering golden company, great price and premium quality for Manufacturer for Snap-in Ultra capacitor - Conductive Polymer SMD Hybrid Solid Capacitor TA-Series – Holy , The product will supply to all over the world, such as: Philadelphia, Kuwait, Islamabad, We insist on the principle of "Credit being primary, Customers being the king and Quality being the best", we are looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.

Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
