Manufacturer for Snap-in Ultra capacitor - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy
Manufacturer for Snap-in Ultra capacitor - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 35 ~ 250 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 10000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
35 |
22 |
6.3*8 |
0.12 |
87 |
600 |
33 |
6.3*8 |
0.12 |
62 |
920 |
|
47 |
8*8 |
0.12 |
87 |
1150 |
|
150 |
8*12 |
0.12 |
62 |
1850 |
|
220 |
10*12 |
0.12 |
47 |
2500 |
|
50 |
22 |
6.3*8 |
0.12 |
65 |
1400 |
47 |
8*12 |
0.12 |
31 |
1500 |
|
68 |
10*12 |
0.12 |
26 |
1800 |
|
120 |
10*12 |
0.12 |
25 |
2200 |
|
63 |
22 |
8*8 |
0.12 |
72 |
900 |
33 |
8*12 |
0.12 |
65 |
1200 |
|
82 |
10*12 |
0.12 |
42 |
2100 |
|
80 |
10 |
8*8 |
0.12 |
45 |
950 |
12 |
8*12 |
0.12 |
43 |
1500 |
|
22 |
10*12 |
0.12 |
38 |
1800 |
|
100 |
15 |
8*12 |
0.12 |
44 |
1100 |
22 |
10*12 |
0.12 |
37 |
1500 |
|
33 |
10*12 |
0.12 |
37 |
1800 |
|
160 |
10 |
8*12 |
0.12 |
97 |
950 |
15 |
10*12 |
0.12 |
82 |
1100 |
|
22 |
10*12 |
0.12 |
77 |
1500 |
|
200 |
8.2 |
8*12 |
0.12 |
107 |
700 |
15 |
10*12 |
0.12 |
107 |
850 |
|
220 (2P) |
6.8 |
8*12 |
0.12 |
107 |
550 |
10 |
10*12 |
0.12 |
107 |
750 |
|
250 |
3.3 |
8*12 |
0.12 |
472 |
300 |
6.8 |
10*12 |
0.12 |
444 |
350 |
|
8.2 |
10*12 |
0.12 |
409 |
500 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Product detail pictures:


Related Product Guide:
Well-run equipment, specialist income crew, and better after-sales services; We're also a unified major family, anyone stay with the organization value "unification, determination, tolerance" for Manufacturer for Snap-in Ultra capacitor - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy , The product will supply to all over the world, such as: Ottawa, Australia, Zurich, Our product quality is one of the major concerns and has been produced to meet the customer's standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.

After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
