Manufacturer of China Conductive Polymer Electrolytic Capacitors
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Manufacturer of China Conductive Polymer Electrolytic Capacitors, We usually concertrating on acquiring new creative products to fulfill request from our clientele all around the world. Be a part of us and let’s make driving safer and funnier jointly!
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for China Electrolytic Capacitor, electrolytic capacitors, During in 11 years, We now have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that “customer first” and committed to helping customers expand their business, so that they become the Big Boss !
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +105℃ | ||
| Rated Voltage Range | 2.5 ~ 25V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Rated voltage (V) | 2.5～25 | (at 20℃,120Hz) |
| tanδ (Max.) | 0.12 | ||
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
| Z(-55℃)/Z(+20℃) | ≤1.25 | ||
| Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 105℃. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
ΦD |
5 |
6.3 |
8 |
10 |
|
P |
2 |
2.5 |
3.5 |
5 |
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
ɑ |
L<16mm：1.0 |
|||
|
L≧16mm：2.0 |
||||
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
ESR(mΩ)at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
|
2.5 |
680 |
8*12 |
10 |
5330 |
|
820 |
8*12 |
10 |
5330 |
|
|
1500 |
10*12 |
10 |
5600 |
|
|
4 |
560 |
8*12 |
10 |
5330 |
|
1200 |
10*12 |
10 |
5600 |
|
|
6.3 |
820 |
6.3*11 |
16 |
3500 |
|
680 |
8*12 |
12 |
4820 |
|
|
1000 |
8*12 |
12 |
4820 |
|
|
820 |
10*12 |
10 |
5600 |
|
|
1000 |
10*12 |
10 |
5400 |
|
|
1500 |
10*12 |
10 |
5600 |
|
|
10 |
330 |
6.3*11 |
16 |
2000 |
|
560 |
8*12 |
12 |
4500 |
|
|
1000 |
8*12 |
12 |
4500 |
|
|
820 |
10*12 |
12 |
6100 |
|
|
1000 |
10*12 |
12 |
6100 |
|
|
1500 |
10*12 |
12 |
6100 |
|
|
16 |
220 |
6.3*11 |
25 |
2500 |
|
330 |
8*12 |
13 |
4800 |
|
|
470 |
8*12 |
13 |
4800 |
|
|
560 |
8*12 |
13 |
4800 |
|
|
560 |
10*12 |
13 |
5250 |
|
|
1000 |
10*12 |
13 |
5250 |
|
|
20 |
100 |
8*12 |
30 |
2750 |
|
150 |
10*12 |
25 |
2900 |
|
|
25 |
82 |
5*11 |
55 |
1500 |
|
150 |
6.3*11 |
55 |
1500 |
|
|
47 |
8*12 |
24 |
2320 |
|
|
68 |
8*12 |
24 |
3320 |
|
|
270 |
8*12 |
15 |
4900 |
|
|
330 |
10*12 |
15 |
4900 |
|
|
470 |
10*12 |
15 |
4900 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| Coefficient | 0.05 | 0.30 | 0.70 | 1.00 |
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Manufacturer of China Conductive Polymer Electrolytic Capacitors, We usually concertrating on acquiring new creative products to fulfill request from our clientele all around the world. Be a part of us and let’s make driving safer and funnier jointly!
Manufacturer of China Electrolytic Capacitor, Electrolytic Capacitors, During in 11 years, We now have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that “customer first” and committed to helping customers expand their business, so that they become the Big Boss !
Products categories
-
Factory Supply Ultrafine for Conductive Paste F...
-
Manufactur standard China Ultracapacitor Module...
-
Factory Cheap Hot Stock 400V 1200UF High Qualit...
-
2019 wholesale price 2.0f 5.5V Farad Capacitor ...
-
Super Lowest Price Professional Cylindrica Elec...
-
Hot sale Factory China 8CH CCTV Ahd DVR Recordi...
