Massive Selection for 10000UF 450V Aluminum Electrolytic Capacitor From Liron Manufacturer
The key to our success is “Good Product Excellent, Reasonable Rate and Efficient Service” for Massive Selection for 10000UF 450V Aluminum Electrolytic Capacitor From Liron Manufacturer, As an experienced group we also accept tailored orders. The main target of our organization would be to build up a satisfying memory for all clients, and build a long-term win-win organization relationship.
The key to our success is “Good Product Excellent, Reasonable Rate and Efficient Service” for China Capacitor and Electronic Component, Due to the changing trends in this field, we involve ourselves into products trade with dedicated efforts and managerial excellence. We maintain timely delivery schedules, innovative designs, quality and transparency for our customers. Our moto is to deliver quality products within stipulated time.
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 2.5 ~ 25V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Rated voltage (V) | 2.5~25 | (at 20℃,120Hz) |
tanδ (Max.) | 0.12 | ||
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Rated voltage (V) |
Rated capacitance(uF) |
Case size |
ESR(mΩ) |
Rated ripple current (mArms/105℃/100kHz) |
2.5 |
560 |
6.3*8 |
20 |
2690 |
820 |
6.3*8 |
18 |
2690 |
|
820 |
8*8 |
12 |
4100 |
|
1000 |
8*8 |
12 |
5700 |
|
4 |
330 |
5*7 |
20 |
2690 |
560 |
6.3*8 |
18 |
2690 |
|
820 |
8*8 |
14 |
4100 |
|
6.3 |
220 |
5*6 |
20 |
2000 |
220 |
5*7 |
20 |
2500 |
|
270 |
5*7 |
20 |
3100 |
|
330 |
5*7 |
20 |
3100 |
|
330 |
6.3*7 |
18 |
3100 |
|
390 |
5*9 |
20 |
2500 |
|
470 |
5.5*9 |
20 |
2500 |
|
470 |
6.3*8 |
18 |
3100 |
|
560 |
6.3*8 |
18 |
3100 |
|
560 |
8*8 |
18 |
4100 |
|
680 |
6.3*8 |
16 |
3100 |
|
680 |
8*8 |
16 |
4100 |
|
820 |
6.3*9 |
18 |
3100 |
|
820 |
8*8 |
16 |
3800 |
|
1000 |
6.3*11 |
15 |
3100 |
|
1000 |
8*8 |
15 |
4100 |
|
1500 |
8*12 |
14 |
4100 |
|
1500 |
10*12 |
14 |
5330 |
|
2200 |
10*12 |
14 |
5330 |
|
7.5(0P) |
220 |
5*7 |
22 |
2500 |
470 |
6.3*11 |
16 |
3500 |
|
500 |
5*9 |
16 |
3100 |
|
500 |
6.3*11 |
16 |
3500 |
|
680 |
8*8 |
16 |
4100 |
|
10 |
150 |
5*7 |
22 |
2000 |
220 |
6.3*8 |
18 |
2800 |
|
270 |
6.3*8 |
18 |
3100 |
|
330 |
6.3*8 |
16 |
4100 |
|
470 |
8*8 |
16 |
4100 |
|
680 |
8*8 |
15 |
4100 |
|
820 |
8*12 |
14 |
4100 |
|
1000 |
8*12 |
16 |
4100 |
|
1000 |
10*12 |
13 |
4500 |
|
1200 |
10*12 |
13 |
4500 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
Coefficient | 0.05 | 0.30 | 0.70 | 1.00 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size |
ESR(mΩ) |
Rated ripple current (mArms/105℃/100kHz) |
16 |
82 |
5*7 |
22 |
1500 |
100 |
6.3*8 |
18 |
2500 |
|
150 |
6.3*8 |
18 |
2500 |
|
220 |
5.5*9 |
18 |
2200 |
|
220 |
6.3*7 |
16 |
2900 |
|
220 |
8*8 |
15 |
4100 |
|
270 |
6.3*8 |
20 |
2800 |
|
270 |
8*8 |
15 |
4500 |
|
330 |
6.3*9 |
18 |
3100 |
|
330 |
8*8 |
18 |
3100 |
|
470 |
5.5*10 |
20 |
2700 |
|
470 |
6.3*9 |
18 |
3100 |
|
470 |
8*8 |
14 |
3400 |
|
470 |
8*12 |
14 |
4100 |
|
470 |
10*12 |
13 |
5100 |
|
560 |
8*12 |
13 |
3800 |
|
680 |
8*12 |
16 |
3500 |
|
680 |
10*12 |
13 |
5250 |
|
820 |
8*12 |
13 |
3600 |
|
820 |
10*12 |
13 |
5250 |
|
1000 |
8*12 |
13 |
4100 |
|
1000 |
10*12 |
13 |
5250 |
|
20 |
220 |
6.3*8 |
35 |
2200 |
330 |
8*12 |
25 |
3100 |
|
470 |
8*12 |
25 |
3500 |
|
680 |
10*12 |
25 |
3800 |
|
25 |
22 |
5*7 |
50 |
1300 |
33 |
6.3*8 |
40 |
1500 |
|
47 |
6.3*8 |
40 |
2900 |
|
68 |
6.3*8 |
40 |
2900 |
|
100 |
8*8 |
40 |
3100 |
|
150 |
8*8 |
35 |
3100 |
|
220 |
8*12 |
20 |
3800 |
|
220 |
10*12 |
15 |
4560 |
|
330 |
8*12 |
18 |
3000 |
|
330 |
10*12 |
15 |
4850 |
|
390 |
6.3*13 |
25 |
2200 |
|
470 |
6.3*15 |
25 |
3000 |
|
470 |
8*12 |
20 |
4100 |
|
680 |
8*16 |
20 |
3300 |
|
680 |
10*12 |
15 |
4100 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
The key to our success is “Good Product Excellent, Reasonable Rate and Efficient Service” for Massive Selection for 10000UF 450V Aluminum Electrolytic Capacitor From Liron Manufacturer, As an experienced group we also accept tailored orders. The main target of our organization would be to build up a satisfying memory for all clients, and build a long-term win-win organization relationship.
Massive Selection for China Capacitor and Electronic Component, Due to the changing trends in this field, we involve ourselves into products trade with dedicated efforts and managerial excellence. We maintain timely delivery schedules, innovative designs, quality and transparency for our customers. Our moto is to deliver quality products within stipulated time.