New Delivery for Electric Double Layer Capacitor - SMD Conductive Polymer Capacitors CT Series – Holy
New Delivery for Electric Double Layer Capacitor - SMD Conductive Polymer Capacitors CT Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 2.5 ~ 25 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±10% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
8 |
10 |
10 |
L |
6 |
6 |
7 |
12.0 |
8.0 |
12.6 |
W |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
H |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
C |
6 |
7.3 |
9.0 |
9.0 |
11.0 |
11.0 |
R |
0.5~0.8 |
0.5~0.8 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
P |
1.4 |
2.1 |
3.2 |
3.2 |
4.6 |
4.6 |
Standard Ratings
Rated voltage (V) |
Rated capacitance (uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
Rated ripple carrent (mArms/125℃100kHz) |
4 (0G) |
150 |
6.3*6 |
300 |
0.12 |
35 |
2450 |
700 |
680 |
10*8 |
544 |
0.12 |
25 |
3700 |
1057 |
|
6.3 (0J) |
82 |
6.3*6 |
3600 |
0.12 |
40 |
2400 |
686 |
100 |
6.3*6 |
300 |
0.12 |
40 |
2400 |
686 |
|
10 (1A) |
120 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
150 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
|
330 |
10*8 |
660 |
0.12 |
30 |
3700 |
1057 |
|
16 (1C) |
39 |
6.3*6 |
300 |
0.12 |
50 |
2050 |
586 |
47 |
6.3*6 |
300 |
0.12 |
80 |
1260 |
450 |
|
82 |
8*7 |
300 |
0.12 |
40 |
2700 |
711 |
|
150 |
10*8 |
480 |
0.12 |
35 |
3020 |
863 |
|
180 |
10*8 |
576 |
0.12 |
35 |
3020 |
863 |
|
220 |
8*12 |
704 |
0.12 |
20 |
3220 |
889 |
|
270 |
8*12 |
864 |
0.12 |
20 |
4000 |
1250 |
|
330 |
8*12 |
1056 |
0.12 |
20 |
4200 |
1350 |
|
470 |
8*12 |
1504 |
0.12 |
20 |
4300 |
1433 |
|
680 |
10*12 |
2176 |
0.12 |
18 |
4900 |
1400 |
|
25 (1E) |
22 |
6.3*6 |
300 |
0.12 |
70 |
1300 |
400 |
47 |
6.3*7 |
300 |
0.12 |
60 |
1500 |
500 |
|
82 |
10*8 |
410 |
0.12 |
45 |
2400 |
686 |
|
100 |
10*12 |
500 |
0.12 |
30 |
4320 |
1234 |
|
150 |
10*12 |
750 |
0.12 |
45 |
4320 |
1234 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Product detail pictures:

Related Product Guide:
We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for New Delivery for Electric Double Layer Capacitor - SMD Conductive Polymer Capacitors CT Series – Holy , The product will supply to all over the world, such as: Iraq, Greece, New Orleans, We insist on the principle of "Credit being primary, Customers being the king and Quality being the best", we are looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.

This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
