New Delivery for Electric Double Layer Capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy
New Delivery for Electric Double Layer Capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 16 ~ 125 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
|
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
|
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
|
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
|
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) |
Rated ripple current (mArms/125℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1100 |
0.16 |
|
270 |
8*10.5 |
43.2 |
26 |
1500 |
0.16 |
|
|
470 |
10*10.5 |
75.2 |
21 |
2000 |
0.16 |
|
|
560 |
10*12.5 |
89.6 |
15 |
2300 |
0.16 |
|
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1000 |
0.16 |
|
150 |
8*10.5 |
37.5 |
27 |
1300 |
0.16 |
|
|
270 |
10*10.5 |
67.5 |
22 |
1500 |
0.16 |
|
|
330 |
10*12.5 |
82.5 |
16 |
1700 |
0.16 |
|
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
900 |
0.16 |
|
100 |
8*10.5 |
35 |
30 |
1200 |
0.16 |
|
|
150 |
10*10.5 |
52.5 |
23 |
1400 |
0.16 |
|
|
220 |
10*12.5 |
77 |
17 |
1700 |
0.16 |
|
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
900 |
0.16 |
|
56 |
8*10.5 |
22.4 |
32 |
1200 |
0.16 |
|
|
100 |
10*10.5 |
40 |
24 |
1400 |
0.16 |
|
|
120 |
10*12.5 |
48 |
18 |
1600 |
0.16 |
|
|
50 |
15 |
6.3*7.7 |
10 |
80 |
800 |
0.16 |
|
33 |
8*10.5 |
16.5 |
35 |
1100 |
0.16 |
|
|
56 |
10*10.5 |
28 |
25 |
1300 |
0.16 |
|
|
82 |
10*12.5 |
41 |
19 |
1500 |
0.16 |
|
|
63 |
10 |
6.3*7.7 |
10 |
100 |
700 |
0.16 |
|
22 |
8*10.5 |
13.86 |
40 |
1000 |
0.16 |
|
|
33 |
8*10.5 |
20.79 |
40 |
1000 |
0.16 |
|
|
33 |
10*10.5 |
20.79 |
30 |
1200 |
0.16 |
|
|
47 |
10*10.5 |
29.61 |
30 |
1200 |
0.16 |
|
|
56 |
10*12.5 |
35.28 |
22 |
1400 |
0.16 |
|
|
80 |
12 |
10*10.5 |
10 |
70 |
900 |
0.16 |
|
15 |
10*10.5 |
12 |
70 |
900 |
0.16 |
|
|
18 |
10*12.5 |
14.4 |
50 |
1100 |
0.16 |
|
|
100 |
10 |
10*10.5 |
10 |
80 |
800 |
0.16 |
|
12 |
10*10.5 |
12 |
80 |
800 |
0.16 |
|
|
15 |
10*12.5 |
15 |
60 |
1000 |
0.16 |
|
|
125 |
10 |
10*10.5 |
12.5 |
90 |
700 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
TB Series
●Low ESR
● High Voltage, Long Life
● 125℃,2,000~4,000hrs
● RoHS compliant
Items
Characteristics
Category
Temperature Range
-55 ~ +125℃
Rated Voltage Range
16 ~ 125 V
Capacitance tolerance
±20%(M) (at 20℃,120Hz)
Leakage Current
After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor
Less than or equal to the specified
(at 20℃,120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-55℃)/Z(+20℃)
≤0.75 to 1.5
(100KHz)
Z(+125℃)/Z(+20℃)
≤0.75 to 2.0
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Damp Heat
(Steady State)
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH.
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Surge Voltage
Surge Voltage=Rated voltage * 1.15(V)
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Product detail pictures:
Related Product Guide:
We attempt for excellence, provider the customers", hopes to be the most beneficial cooperation team and dominator enterprise for staff, suppliers and shoppers, realizes value share and continuous advertising for New Delivery for Electric Double Layer Capacitor - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy , The product will supply to all over the world, such as: Jordan, Australia, Algeria, The credibility is the priority, and the service is the vitality. We promise we have now the ability to offer excellent quality and reasonable price items for customers. With us, your safety is guaranteed.
By Mary from Grenada - 2017.10.23 10:29
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Nancy from Ghana - 2018.09.08 17:09
