New Fashion Design for IOT ultra capacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy
New Fashion Design for IOT ultra capacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 50 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
ΦD |
6.3 |
8 |
10 |
10 |
L |
L+1.5Max |
|||
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:
Related Product Guide:
The client satisfaction is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and service for New Fashion Design for IOT ultra capacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy , The product will supply to all over the world, such as: Istanbul, Plymouth, Panama, Our products are mainly exported to Europe, Africa, America, the Middle East and Southeast Asia and other countries and regions. We have enjoyed a great reputation among our customers for quality products and good services.We would make friends with businessmen from at home and abroad, following the purpose of "Quality First, Reputation First, the Best Services."

The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.

Write your message here and send it to us