OEM Supply 48V Ultracapacitor - SMD Conductive Polymer Capacitors CT Series – Holy
OEM Supply 48V Ultracapacitor - SMD Conductive Polymer Capacitors CT Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 2.5 ~ 25 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±10% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
8 |
10 |
10 |
L |
6 |
6 |
7 |
12.0 |
8.0 |
12.6 |
W |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
H |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
C |
6 |
7.3 |
9.0 |
9.0 |
11.0 |
11.0 |
R |
0.5~0.8 |
0.5~0.8 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
P |
1.4 |
2.1 |
3.2 |
3.2 |
4.6 |
4.6 |
Standard Ratings
Rated voltage (V) |
Rated capacitance (uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
Rated ripple carrent (mArms/125℃100kHz) |
4 (0G) |
150 |
6.3*6 |
300 |
0.12 |
35 |
2450 |
700 |
680 |
10*8 |
544 |
0.12 |
25 |
3700 |
1057 |
|
6.3 (0J) |
82 |
6.3*6 |
3600 |
0.12 |
40 |
2400 |
686 |
100 |
6.3*6 |
300 |
0.12 |
40 |
2400 |
686 |
|
10 (1A) |
120 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
150 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
|
330 |
10*8 |
660 |
0.12 |
30 |
3700 |
1057 |
|
16 (1C) |
39 |
6.3*6 |
300 |
0.12 |
50 |
2050 |
586 |
47 |
6.3*6 |
300 |
0.12 |
80 |
1260 |
450 |
|
82 |
8*7 |
300 |
0.12 |
40 |
2700 |
711 |
|
150 |
10*8 |
480 |
0.12 |
35 |
3020 |
863 |
|
180 |
10*8 |
576 |
0.12 |
35 |
3020 |
863 |
|
220 |
8*12 |
704 |
0.12 |
20 |
3220 |
889 |
|
270 |
8*12 |
864 |
0.12 |
20 |
4000 |
1250 |
|
330 |
8*12 |
1056 |
0.12 |
20 |
4200 |
1350 |
|
470 |
8*12 |
1504 |
0.12 |
20 |
4300 |
1433 |
|
680 |
10*12 |
2176 |
0.12 |
18 |
4900 |
1400 |
|
25 (1E) |
22 |
6.3*6 |
300 |
0.12 |
70 |
1300 |
400 |
47 |
6.3*7 |
300 |
0.12 |
60 |
1500 |
500 |
|
82 |
10*8 |
410 |
0.12 |
45 |
2400 |
686 |
|
100 |
10*12 |
500 |
0.12 |
30 |
4320 |
1234 |
|
150 |
10*12 |
750 |
0.12 |
45 |
4320 |
1234 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Product detail pictures:

Related Product Guide:
We pursue the administration tenet of "Quality is exceptional, Provider is supreme, Name is first", and will sincerely create and share success with all clientele for OEM Supply 48V Ultracapacitor - SMD Conductive Polymer Capacitors CT Series – Holy , The product will supply to all over the world, such as: Algeria, Berlin, Belize, We will initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
