OEM/ODM Manufacturer CD60 Motor Starting Capacitor for Motor Pupm
We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for OEM/ODM Manufacturer CD60 Motor Starting Capacitor for Motor Pupm, We warmly welcome your participation dependant on mutual added benefits within the in close proximity to future.
We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for China Motor Start Capacitor and Motor Fan Capacitor, Our company, is always regarding quality as company’ s foundation, seeking for development via high degree of credibility , abiding by iso9000 quality management standard strictly , creating top-ranking company by spirit of progress-marking honesty and optimism.
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 50 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
ΦD |
6.3 |
8 |
10 |
10 |
L |
L+1.5Max |
|||
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for OEM/ODM Manufacturer CD60 Motor Starting Capacitor for Motor Pupm, We warmly welcome your participation dependant on mutual added benefits within the in close proximity to future.
OEM/ODM Manufacturer China Motor Start Capacitor and Motor Fan Capacitor, Our company, is always regarding quality as company’ s foundation, seeking for development via high degree of credibility , abiding by iso9000 quality management standard strictly , creating top-ranking company by spirit of progress-marking honesty and optimism.