One of Hottest for Top Capacitor Manufacturer 500V 12000UF Electrolytic Capacitor Run Capacitor
The key to our success is “Good Product Quality, Reasonable Value and Efficient Service” for One of Hottest for Top Capacitor Manufacturer 500V 12000UF Electrolytic Capacitor Run Capacitor, Our enterprise warmly welcome close friends from everywhere in the environment to go to, examine and negotiate organization.
The key to our success is “Good Product Quality, Reasonable Value and Efficient Service” for China Motor Run Capacitor and Electric Component, As the world economic integration bringing challenges and opportunities to the xxx industry, our company , by carrying on our teamwork, quality first, innovation and mutual benefit, are confident enough to offer our clients sincerely with qualified products, competitive price and great service, and to build a brighter future under the spirit of higher, faster, stronger with our friends together by carrying on our discipline.
◆ Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +105℃ | ||
| Rated Voltage Range | 2.5 ~ 25V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Rated voltage (V) | 2.5～25 | (at 20℃,120Hz) |
| tanδ (Max.) | 0.12 | ||
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
| Z(-55℃)/Z(+20℃) | ≤1.25 | ||
| Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 105℃. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat(Steady State) | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
◆ Dimensions (mm)
|
ΦD |
5 |
6.3 |
8 |
10 |
|
P |
2 |
2.5 |
3.5 |
5 |
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
ɑ |
L<16mm：1.0 |
|||
|
L≧16mm：2.0 |
||||
◆ Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
ESR(mΩ) at 20℃,100 KHz | Rated ripple current (mArms/105℃/100kHz) |
|
2.5 |
680 |
8*12 |
10 |
5330 |
|
820 |
8*12 |
10 |
5330 |
|
|
1500 |
10*12 |
10 |
5600 |
|
|
4 |
560 |
8*12 |
10 |
5330 |
|
1200 |
10*12 |
10 |
5600 |
|
|
6.3 |
820 |
6.3*11 |
16 |
3500 |
|
680 |
8*12 |
12 |
4820 |
|
|
1000 |
8*12 |
12 |
4820 |
|
|
820 |
10*12 |
10 |
5600 |
|
|
1000 |
10*12 |
10 |
5400 |
|
|
1500 |
10*12 |
10 |
5600 |
|
|
10 |
330 |
6.3*11 |
16 |
2000 |
|
560 |
8*12 |
12 |
4500 |
|
|
1000 |
8*12 |
12 |
4500 |
|
|
820 |
10*12 |
12 |
6100 |
|
|
1000 |
10*12 |
12 |
6100 |
|
|
1500 |
10*12 |
12 |
6100 |
|
|
16 |
220 |
6.3*11 |
25 |
2500 |
|
330 |
8*12 |
13 |
4800 |
|
|
470 |
8*12 |
13 |
4800 |
|
|
560 |
8*12 |
13 |
4800 |
|
|
560 |
10*12 |
13 |
5250 |
|
|
1000 |
10*12 |
13 |
5250 |
|
|
20 |
100 |
8*12 |
30 |
2750 |
|
150 |
10*12 |
25 |
2900 |
|
|
25 |
82 |
5*11 |
55 |
1500 |
|
150 |
6.3*11 |
55 |
1500 |
|
|
47 |
8*12 |
24 |
2320 |
|
|
68 |
8*12 |
24 |
3320 |
|
|
270 |
8*12 |
15 |
4900 |
|
|
330 |
10*12 |
15 |
4900 |
|
|
470 |
10*12 |
15 |
4900 |
◆ Rated Ripple Current Coefficient
|
Frequency (Hz) |
120Hz≤f＜1kHz |
1kHz≤f＜10kHz |
10kHz≤f＜100kHz |
100kHz≤f＜500kHz |
| Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
The key to our success is “Good Product Quality, Reasonable Value and Efficient Service” for One of Hottest for Top Capacitor Manufacturer 500V 12000UF Electrolytic Capacitor Run Capacitor, Our enterprise warmly welcome close friends from everywhere in the environment to go to, examine and negotiate organization.
One of Hottest for China Motor Run Capacitor and Electric Component, As the world economic integration bringing challenges and opportunities to the xxx industry, our company , by carrying on our teamwork, quality first, innovation and mutual benefit, are confident enough to offer our clients sincerely with qualified products, competitive price and great service, and to build a brighter future under the spirit of higher, faster, stronger with our friends together by carrying on our discipline.
Products categories
-
China Factory for CD60 Motor Starting Capacitor...
-
China Supplier Radial Type 2.7V 4.7f Supercapac...
-
Factory Free sample China High Voltage 3.0V 60f...
-
Special Price for Super Capacitor 5.4V, 5.5V, 7...
-
Supply OEM/ODM 2.7V 100f Super Capacitor, Large...
-
OEM Customized High Voltage 2.7V, 2.8V, 3.0V 60...
