Personlized Products SMD type hybrid capacitors - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy
Personlized Products SMD type hybrid capacitors - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 125 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*10.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*10.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*12.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1000 |
0.16 |
150 |
8*10.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*10.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*12.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
900 |
0.16 |
100 |
8*10.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*10.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*12.5 |
77 |
17 |
1700 |
0.16 |
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
900 |
0.16 |
56 |
8*10.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*10.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*12.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.7 |
10 |
80 |
800 |
0.16 |
33 |
8*10.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*10.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*12.5 |
41 |
19 |
1500 |
0.16 |
|
63 |
10 |
6.3*7.7 |
10 |
100 |
700 |
0.16 |
22 |
8*10.5 |
13.86 |
40 |
1000 |
0.16 |
|
33 |
8*10.5 |
20.79 |
40 |
1000 |
0.16 |
|
33 |
10*10.5 |
20.79 |
30 |
1200 |
0.16 |
|
47 |
10*10.5 |
29.61 |
30 |
1200 |
0.16 |
|
56 |
10*12.5 |
35.28 |
22 |
1400 |
0.16 |
|
80 |
12 |
10*10.5 |
10 |
70 |
900 |
0.16 |
15 |
10*10.5 |
12 |
70 |
900 |
0.16 |
|
18 |
10*12.5 |
14.4 |
50 |
1100 |
0.16 |
|
100 |
10 |
10*10.5 |
10 |
80 |
800 |
0.16 |
12 |
10*10.5 |
12 |
80 |
800 |
0.16 |
|
15 |
10*12.5 |
15 |
60 |
1000 |
0.16 |
|
125 |
10 |
10*10.5 |
12.5 |
90 |
700 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
TB Series
●Low ESR
● High Voltage, Long Life
● 125℃,2,000~4,000hrs
● RoHS compliant
Items
Characteristics
Category
Temperature Range
-55 ~ +125℃
Rated Voltage Range
16 ~ 125 V
Capacitance tolerance
±20%(M) (at 20℃,120Hz)
Leakage Current
After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor
Less than or equal to the specified
(at 20℃,120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-55℃)/Z(+20℃)
≤0.75 to 1.5
(100KHz)
Z(+125℃)/Z(+20℃)
≤0.75 to 2.0
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Damp Heat
(Steady State)
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH.
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Surge Voltage
Surge Voltage=Rated voltage * 1.15(V)
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Product detail pictures:

Related Product Guide:
Fast and very good quotations, informed advisers to help you choose the correct merchandise that suits all your preferences, a short creation time, responsible excellent command and different companies for paying and shipping affairs for Personlized Products SMD type hybrid capacitors - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy , The product will supply to all over the world, such as: The Swiss, Iceland, Armenia, They're durable modeling and promoting well all over the world. Under no circumstances disappearing key functions in a brief time, it's a should for you personally of fantastic quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the business make an awesome efforts to expand its international trade, raise its enterprise. rofit and improve its export scale. We are confident that we'll have a vibrant prospect and to be distributed all over the world in the years to come.

Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
