Popular Design for cylindrical capacitors - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy
Popular Design for cylindrical capacitors - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 16 ~ 50 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±30% of the initial value | ||
D.F.(tanδ) | ≦200% of the specified value | ||
ESR | ≦200% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
ΦD |
6.3 |
8 |
10 |
10 |
L |
L+1.5Max |
|||
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ(120Hz) |
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
4.7<C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
C>33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:

Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization to the long-term to build together with shoppers for mutual reciprocity and mutual advantage for Popular Design for cylindrical capacitors - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy , The product will supply to all over the world, such as: Accra, California, Dominica, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.

We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!

Write your message here and send it to us