Rapid Delivery for hybrid capacitors - Radial Conductive Polymer Solid Capacitors CA Series – Holy
Rapid Delivery for hybrid capacitors - Radial Conductive Polymer Solid Capacitors CA Series – Holy Detail:
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 2.5 ~ 25V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Rated voltage (V) | 2.5~25 | (at 20℃,120Hz) |
tanδ (Max.) | 0.12 | ||
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
ESR(mΩ)at 20℃,100 KHz |
Rated ripple current (mArms/105℃/100kHz) |
2.5 |
680 |
8*12 |
10 |
5330 |
820 |
8*12 |
10 |
5330 |
|
1500 |
10*12 |
10 |
5600 |
|
4 |
560 |
8*12 |
10 |
5330 |
1200 |
10*12 |
10 |
5600 |
|
6.3 |
820 |
6.3*11 |
16 |
3500 |
680 |
8*12 |
12 |
4820 |
|
1000 |
8*12 |
12 |
4820 |
|
820 |
10*12 |
10 |
5600 |
|
1000 |
10*12 |
10 |
5400 |
|
1500 |
10*12 |
10 |
5600 |
|
10 |
330 |
6.3*11 |
16 |
2000 |
560 |
8*12 |
12 |
4500 |
|
1000 |
8*12 |
12 |
4500 |
|
820 |
10*12 |
12 |
6100 |
|
1000 |
10*12 |
12 |
6100 |
|
1500 |
10*12 |
12 |
6100 |
|
16 |
220 |
6.3*11 |
25 |
2500 |
330 |
8*12 |
13 |
4800 |
|
470 |
8*12 |
13 |
4800 |
|
560 |
8*12 |
13 |
4800 |
|
560 |
10*12 |
13 |
5250 |
|
1000 |
10*12 |
13 |
5250 |
|
20 |
100 |
8*12 |
30 |
2750 |
150 |
10*12 |
25 |
2900 |
|
25 |
82 |
5*11 |
55 |
1500 |
150 |
6.3*11 |
55 |
1500 |
|
47 |
8*12 |
24 |
2320 |
|
68 |
8*12 |
24 |
3320 |
|
270 |
8*12 |
15 |
4900 |
|
330 |
10*12 |
15 |
4900 |
|
470 |
10*12 |
15 |
4900 |
Rated Ripple Current Coefficient
Frequency (Hz) | 120Hz≤f<1kHz | 1kHz≤f<10kHz | 10kHz≤f<100kHz | 100kHz≤f<500kHz |
Coefficient | 0.05 | 0.30 | 0.70 | 1.00 |
Product detail pictures:

Related Product Guide:
Gaining purchaser gratification is our company's aim eternally. We're going to make great initiatives to create new and top-quality products, satisfy your exclusive prerequisites and supply you with pre-sale, on-sale and after-sale solutions for Rapid Delivery for hybrid capacitors - Radial Conductive Polymer Solid Capacitors CA Series – Holy , The product will supply to all over the world, such as: Eindhoven, St. Petersburg, Iran, Based on our guiding principle of quality is the key to development, we continually strive to exceed our customers' expectations. As such, we sincerely invite all interested companies to contact us for future cooperation, We welcome old and new customers to hold hands together for exploring and developing; For more information, be sure to feel free to contact us. Thanks. Advanced equipment, strict quality control, customer-orientation service, initiative summary and improvement of defects and extensive industry experience enable us to guarantee more customer satisfaction and reputation which, in return, brings us more orders and benefits. If you are interested in any of our merchandise, make sure you feel free to contact us. Inquiry or visit to our company are warmly welcome. We sincerely hope to start a win-win and friendly partnership with you. You can see more details in our website.

The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.

Write your message here and send it to us