Short Lead Time for electronic components - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy
Short Lead Time for electronic components - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +105℃ | ||
| Rated Voltage Range | 35 ~ 250 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
| Z(-55℃)/Z(+20℃) | ≤1.25 | ||
| Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 10000 hours at 105℃. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
ΦD |
5 |
6.3 |
8 |
10 |
|
P |
2 |
2.5 |
3.5 |
5 |
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
ɑ |
L<16mm：1.0 |
|||
|
L≧16mm：2.0 |
||||
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
tanδ（120Hz） |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
|
35 |
22 |
6.3*8 |
0.12 |
87 |
600 |
|
33 |
6.3*8 |
0.12 |
62 |
920 |
|
|
47 |
8*8 |
0.12 |
87 |
1150 |
|
|
150 |
8*12 |
0.12 |
62 |
1850 |
|
|
220 |
10*12 |
0.12 |
47 |
2500 |
|
|
50 |
22 |
6.3*8 |
0.12 |
65 |
1400 |
|
47 |
8*12 |
0.12 |
31 |
1500 |
|
|
68 |
10*12 |
0.12 |
26 |
1800 |
|
|
120 |
10*12 |
0.12 |
25 |
2200 |
|
|
63 |
22 |
8*8 |
0.12 |
72 |
900 |
|
33 |
8*12 |
0.12 |
65 |
1200 |
|
|
82 |
10*12 |
0.12 |
42 |
2100 |
|
|
80 |
10 |
8*8 |
0.12 |
45 |
950 |
|
12 |
8*12 |
0.12 |
43 |
1500 |
|
|
22 |
10*12 |
0.12 |
38 |
1800 |
|
|
100 |
15 |
8*12 |
0.12 |
44 |
1100 |
|
22 |
10*12 |
0.12 |
37 |
1500 |
|
|
33 |
10*12 |
0.12 |
37 |
1800 |
|
|
160 |
10 |
8*12 |
0.12 |
97 |
950 |
|
15 |
10*12 |
0.12 |
82 |
1100 |
|
|
22 |
10*12 |
0.12 |
77 |
1500 |
|
|
200 |
8.2 |
8*12 |
0.12 |
107 |
700 |
|
15 |
10*12 |
0.12 |
107 |
850 |
|
|
220 (2P) |
6.8 |
8*12 |
0.12 |
107 |
550 |
|
10 |
10*12 |
0.12 |
107 |
750 |
|
|
250 |
3.3 |
8*12 |
0.12 |
472 |
300 |
|
6.8 |
10*12 |
0.12 |
444 |
350 |
|
|
8.2 |
10*12 |
0.12 |
409 |
500 |
Rated Ripple Current Coefficient
|
Frequency (Hz) |
120Hz≤f＜1kHz |
1kHz≤f＜10kHz |
10kHz≤f＜100kHz |
100kHz≤f＜500kHz |
| Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Product detail pictures:
Related Product Guide:
Just about every member from our large efficiency income crew values customers' wants and enterprise communication for Short Lead Time for electronic components - Radial Lead Type CW Series Conductive Polymer Solid Capacitor – Holy , The product will supply to all over the world, such as: Liberia, Azerbaijan, Thailand, Our solutions are produced with the best raw materials. Every moment, we constantly improve the production programme. In order to ensure better quality and service, we now have been focusing on the production process. We have got high praise by partner. We are looking forward to establishing business relationship with you.
By Carlos from Panama - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Sabina from Saudi Arabia - 2017.07.07 13:00
Write your message here and send it to us
