Super Purchasing for Conductive Polymer Solid Capacitors
Our commission should be to provide our end users and clients with very best excellent and aggressive portable digital products and solutions for Super Purchasing for Conductive Polymer Solid Capacitors, By more than 8 years of company, now we have accumulated rich experience and advanced technologies from the generation of our merchandise.
Our commission should be to provide our end users and clients with very best excellent and aggressive portable digital products and solutions for China Solid Capacitors, We have been seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 2.5 ~ 25 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
| Z(-55℃)/Z(+20℃) | ≤1.25 | ||
| Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±20% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±10% of the initial value | ||
| D.F.(tanδ) | ≦150% of the specified value | ||
| ESR | ≦150% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
ΦD |
5 |
6.3 |
8 |
8 |
10 |
10 |
|
L |
6 |
6 |
7 |
12.0 |
8.0 |
12.6 |
|
W |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
|
H |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
|
C |
6 |
7.3 |
9.0 |
9.0 |
11.0 |
11.0 |
|
R |
0.5~0.8 |
0.5~0.8 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
|
P |
1.4 |
2.1 |
3.2 |
3.2 |
4.6 |
4.6 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance (uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
tanδ（120Hz） |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
Rated ripple carrent (mArms/125℃100kHz) |
|
4 (0G) |
150 |
6.3*6 |
300 |
0.12 |
35 |
2450 |
700 |
|
680 |
10*8 |
544 |
0.12 |
25 |
3700 |
1057 |
|
|
6.3 (0J) |
82 |
6.3*6 |
3600 |
0.12 |
40 |
2400 |
686 |
|
100 |
6.3*6 |
300 |
0.12 |
40 |
2400 |
686 |
|
|
10 (1A) |
120 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
|
150 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
|
|
330 |
10*8 |
660 |
0.12 |
30 |
3700 |
1057 |
|
|
16 (1C) |
39 |
6.3*6 |
300 |
0.12 |
50 |
2050 |
586 |
|
47 |
6.3*6 |
300 |
0.12 |
80 |
1260 |
450 |
|
|
82 |
8*7 |
300 |
0.12 |
40 |
2700 |
711 |
|
|
150 |
10*8 |
480 |
0.12 |
35 |
3020 |
863 |
|
|
180 |
10*8 |
576 |
0.12 |
35 |
3020 |
863 |
|
|
220 |
8*12 |
704 |
0.12 |
20 |
3220 |
889 |
|
|
270 |
8*12 |
864 |
0.12 |
20 |
4000 |
1250 |
|
|
330 |
8*12 |
1056 |
0.12 |
20 |
4200 |
1350 |
|
|
470 |
8*12 |
1504 |
0.12 |
20 |
4300 |
1433 |
|
|
680 |
10*12 |
2176 |
0.12 |
18 |
4900 |
1400 |
|
|
25 (1E) |
22 |
6.3*6 |
300 |
0.12 |
70 |
1300 |
400 |
|
47 |
6.3*7 |
300 |
0.12 |
60 |
1500 |
500 |
|
|
82 |
10*8 |
410 |
0.12 |
45 |
2400 |
686 |
|
|
100 |
10*12 |
500 |
0.12 |
30 |
4320 |
1234 |
|
|
150 |
10*12 |
750 |
0.12 |
45 |
4320 |
1234 |
Rated Ripple Current Coefficient
|
Frequency (Hz) |
120Hz≤f＜1kHz |
1kHz≤f＜10kHz |
10kHz≤f＜100kHz |
100kHz≤f＜500kHz |
| Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Our commission should be to provide our end users and clients with very best excellent and aggressive portable digital products and solutions for Super Purchasing for Conductive Polymer Solid Capacitors, By more than 8 years of company, now we have accumulated rich experience and advanced technologies from the generation of our merchandise.
Super Purchasing for China Solid Capacitors, We have been seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.
Products categories
-
Special Design for China Ymin Vkl (R) Aluminum ...
-
Original Factory RoHS Compliance Aluminum Elect...
-
Factory Directly supply Gtcap Graphene Supercap...
-
PriceList for 0.47f 5.5V Farad Capacitor with L...
-
High reputation China 1000PF High Voltage Ccg81...
-
8 Years Exporter GTCAP low ESR super capacitor ...
