Wholesale Price 2.5V Ultracapacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy
Wholesale Price 2.5V Ultracapacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy Detail:
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 16 ~ 50 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 105℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
Dimensions (mm)
|
Coated Case |
6.3*7.2 |
8*9.5 |
10*9.5 |
10*11.5 |
|
ΦD |
6.3 |
8 |
10 |
10 |
|
L |
L+1.5Max |
|||
|
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
|
p |
2.5 |
3.5 |
5.0 |
5.0 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage current (uA) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple current (mArms/125℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.2 |
19.2 |
40 |
1100 |
0.16 |
|
270 |
8*9.5 |
43.2 |
26 |
1500 |
0.16 |
|
|
470 |
10*9.5 |
75.2 |
21 |
2000 |
0.16 |
|
|
560 |
10*11.5 |
89.6 |
15 |
2300 |
0.16 |
|
|
25 |
68 |
6.3*7.2 |
17 |
45 |
1000 |
0.16 |
|
150 |
8*9.5 |
37.5 |
27 |
1300 |
0.16 |
|
|
270 |
10*9.5 |
67.5 |
22 |
1500 |
0.16 |
|
|
330 |
10*11.5 |
82.5 |
16 |
1700 |
0.16 |
|
|
35 |
47 |
6.3*7.2 |
16.45 |
60 |
900 |
0.16 |
|
100 |
8*9.5 |
35 |
30 |
1200 |
0.16 |
|
|
150 |
10*9.5 |
52.5 |
23 |
1400 |
0.16 |
|
|
220 |
10*11.5 |
77 |
17 |
1600 |
0.16 |
|
|
40 |
27 |
6.3*7.2 |
10.8 |
70 |
900 |
0.16 |
|
56 |
8*9.5 |
22.4 |
32 |
1200 |
0.16 |
|
|
100 |
10*9.5 |
40 |
24 |
1400 |
0.16 |
|
|
120 |
10*11.5 |
48 |
18 |
1600 |
0.16 |
|
|
50 |
15 |
6.3*7.2 |
10 |
80 |
800 |
0.16 |
|
33 |
8*9.5 |
16.5 |
35 |
1100 |
0.16 |
|
|
56 |
10*9.5 |
28 |
25 |
1300 |
0.16 |
|
|
82 |
10*11.5 |
41 |
19 |
1500 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
Product detail pictures:
Related Product Guide:
Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for Wholesale Price 2.5V Ultracapacitor - Aluminum Electrolytic Capacitors Solid Hybrid YB Series – Holy , The product will supply to all over the world, such as: Anguilla, Paraguay, Canada, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Nana from California - 2018.06.30 17:29
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Naomi from New Zealand - 2018.09.23 18:44
Write your message here and send it to us
