2019 China New Design Shenzhen Factory Direct Sales SMD Capacitor 220UF16V 6.3*7.7mm
We get pleasure from a very very good standing between our shoppers for our fantastic product quality, aggressive price as well as very best support for 2019 China New Design Shenzhen Factory Direct Sales SMD Capacitor 220UF16V 6.3*7.7mm, As an expert specialized with this field, we have been committed to solving any problem of significant temperature protection for users.
We get pleasure from a very very good standing between our shoppers for our fantastic product quality, aggressive price as well as very best support for China Electrolytic Capacitors and SMD Electrolytic Capacitor, Only for accomplishing the good-quality product to meet customer’s demand, all of our products and solutions have been strictly inspected before shipment. We always think about the question on the side of the customers, because you win, we win!
Specifications
Items | Characteristics | |||||
CategoryTemperature Range | -55 ~ +125℃ | |||||
Rated Voltage Range | 2.5 ~ 25V | |||||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | |||||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | |||||
Dissipation Factor | Rated voltage (V) | 2.5~4 | 6.3 | 10~16 | 20~25 | (at 20℃,120Hz) |
tanδ (Max.) | 0.18 | 0.15 | 0.12 | 0.15 | ||
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) | |||
Z(-55℃)/Z(+20℃) | ≤1.25 | |||||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | |||||
Appearance | No significant damage | |||||
Capacitance change | ≦±20% of the initial value | |||||
D.F.(tanδ) | ≦150% of the specified value | |||||
ESR | ≦150% of the specified value | |||||
Leakage current | ≦The specified value | |||||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | |||||
Appearance | No significant damage | |||||
Capacitance change | ≦±20% of the initial value | |||||
D.F.(tanδ) | ≦150% of the specified value | |||||
ESR | ≦150% of the specified value | |||||
Leakage current | ≦The specified value | |||||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | |||||
Appearance | No significant damage | |||||
Capacitance change | ≦±20% of the initial value | |||||
D.F.(tanδ) | ≦150% of the specified value | |||||
ESR | ≦150% of the specified value | |||||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size |
ESR(mΩ)at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
2.5 4 |
560 |
8*12 |
13 |
4600 |
820 |
8*12 |
13 |
4600 |
|
1200 |
10*12 |
13 |
5400 |
|
560 |
8*12 |
13 |
4600 |
|
6.3 (OJ) |
820 |
10*12 |
13 |
5400 |
1200 |
10*12 |
13 |
5400 |
|
470 |
8*12 |
15 |
4300 |
|
680 |
8*12 |
15 |
4300 |
|
7.5 (OP) 10 |
820 |
10*12 |
12 |
5400 |
500 |
6.3*8 |
15 |
4300 |
|
680 |
8*8 |
15 |
4300 |
|
820 |
10*12 |
12 |
5400 |
|
220 |
8*12 |
18 |
4000 |
|
470 |
8*12 |
18 |
4000 |
|
16 (1C) |
560 |
10*12 |
14 |
5400 |
820 |
8*12 |
12 |
5100 |
|
1500 |
10*12 |
12 |
5100 |
|
180 |
8*12 |
18 |
3500 |
|
20 (1D) |
220 |
8*12 |
18 |
3500 |
330 |
10*12 |
16 |
4600 |
|
100 |
8*12 |
24 |
3500 |
|
25 (1E) |
150 |
10*12 |
20 |
4300 |
22 |
8*12 |
65 |
1200 |
|
47 |
8*12 |
55 |
1900 |
|
220 |
8*12 |
40 |
2100 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
We get pleasure from a very very good standing between our shoppers for our fantastic product quality, aggressive price as well as very best support for 2019 China New Design Shenzhen Factory Direct Sales SMD Capacitor 220UF16V 6.3*7.7mm, As an expert specialized with this field, we have been committed to solving any problem of significant temperature protection for users.
2019 China New Design China Electrolytic Capacitors and SMD Electrolytic Capacitor, Only for accomplishing the good-quality product to meet customer’s demand, all of our products and solutions have been strictly inspected before shipment. We always think about the question on the side of the customers, because you win, we win!