Hot sale Factory China Ymin Lkm Radial Lead Type Liquid Aluminum Electrolytic Capacitors
Adhering to your principle of “quality, assistance, performance and growth”, we’ve obtained trusts and praises from domestic and worldwide client for Hot sale Factory China Ymin Lkm Radial Lead Type Liquid Aluminum Electrolytic Capacitors, To improved expand market, we sincerely invite ambitious individuals and providers to hitch as an agent.
Adhering to your principle of “quality, assistance, performance and growth”, we’ve obtained trusts and praises from domestic and worldwide client for China Capacitors, Type Super Capacitors, High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. We also offer agency service—that act as the agent in china for our customers. If you are interested in any of our products or have an OEM order to fulfill, make sure you feel free to contact us now. Working with us will save you money and time.
Specifications
Items | Characteristics | |||||
CategoryTemperature Range | -55 ~ +125℃ | |||||
Rated Voltage Range | 2.5 ~ 25V | |||||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | |||||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | |||||
Dissipation Factor | Rated voltage (V) | 2.5~4 | 6.3 | 10~16 | 20~25 | (at 20℃,120Hz) |
tanδ (Max.) | 0.18 | 0.15 | 0.12 | 0.15 | ||
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) | |||
Z(-55℃)/Z(+20℃) | ≤1.25 | |||||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | |||||
Appearance | No significant damage | |||||
Capacitance change | ≦±20% of the initial value | |||||
D.F.(tanδ) | ≦150% of the specified value | |||||
ESR | ≦150% of the specified value | |||||
Leakage current | ≦The specified value | |||||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | |||||
Appearance | No significant damage | |||||
Capacitance change | ≦±20% of the initial value | |||||
D.F.(tanδ) | ≦150% of the specified value | |||||
ESR | ≦150% of the specified value | |||||
Leakage current | ≦The specified value | |||||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | |||||
Appearance | No significant damage | |||||
Capacitance change | ≦±20% of the initial value | |||||
D.F.(tanδ) | ≦150% of the specified value | |||||
ESR | ≦150% of the specified value | |||||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size |
ESR(mΩ)at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
2.5 4 |
560 |
8*12 |
13 |
4600 |
820 |
8*12 |
13 |
4600 |
|
1200 |
10*12 |
13 |
5400 |
|
560 |
8*12 |
13 |
4600 |
|
6.3 (OJ) |
820 |
10*12 |
13 |
5400 |
1200 |
10*12 |
13 |
5400 |
|
470 |
8*12 |
15 |
4300 |
|
680 |
8*12 |
15 |
4300 |
|
7.5 (OP) 10 |
820 |
10*12 |
12 |
5400 |
500 |
6.3*8 |
15 |
4300 |
|
680 |
8*8 |
15 |
4300 |
|
820 |
10*12 |
12 |
5400 |
|
220 |
8*12 |
18 |
4000 |
|
470 |
8*12 |
18 |
4000 |
|
16 (1C) |
560 |
10*12 |
14 |
5400 |
820 |
8*12 |
12 |
5100 |
|
1500 |
10*12 |
12 |
5100 |
|
180 |
8*12 |
18 |
3500 |
|
20 (1D) |
220 |
8*12 |
18 |
3500 |
330 |
10*12 |
16 |
4600 |
|
100 |
8*12 |
24 |
3500 |
|
25 (1E) |
150 |
10*12 |
20 |
4300 |
22 |
8*12 |
65 |
1200 |
|
47 |
8*12 |
55 |
1900 |
|
220 |
8*12 |
40 |
2100 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
Adhering to your principle of “quality, assistance, performance and growth”, we’ve obtained trusts and praises from domestic and worldwide client for Hot sale Factory China Ymin Lkm Radial Lead Type Liquid Aluminum Electrolytic Capacitors, To improved expand market, we sincerely invite ambitious individuals and providers to hitch as an agent.
Hot sale Factory China Capacitors, Type Super Capacitors, High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. We also offer agency service—that act as the agent in china for our customers. If you are interested in any of our products or have an OEM order to fulfill, make sure you feel free to contact us now. Working with us will save you money and time.