Lowest Price for jump starter - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy

Short Description:

Send email to us Download

Product Detail

Product Tags

Feedback (2)

With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for 6.0V Ultra capacitor, low impedance aluminum electrolytic capacitors, CE aluminum electrolytic capacitors, We focus on to make excellent quality products to supply service for our clients to establish long-term win-win relationship.

Lowest Price for jump starter - SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series – Holy Detail:

Specifications

Items	Characteristics
CategoryTemperature Range	-55 ~ +125℃
Rated Voltage Range	16 ~ 125 V
Capacitance tolerance	±20%(M) (at 20℃,120Hz)
Leakage Current	After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor	Less than or equal to the specified		(at 20℃,120Hz)
Low TemperatureCharacteristics(Max.Impedance Ratio)	Z(-55℃)/Z(+20℃)	≤0.75 to 1.5	(100KHz)
	Z(+125℃)/Z(+20℃)	≤0.75 to 2.0
Endurance	The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
	Appearance	No significant damage
	Capacitance change	≦±30% of the initial value
	D.F.(tanδ)	≦200% of the specified value
	ESR	≦200% of the specified value
	Leakage current	≦The specified value
Damp Heat (Steady State)	The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH.
	Appearance	No significant damage
	Capacitance change	≦±30% of the initial value
	D.F.(tanδ)	≦200% of the specified value
	ESR	≦200% of the specified value
	Leakage current	≦The specified value
Surge Voltage	Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
	Appearance	No significant damage
	Capacitance change	≦±30% of the initial value
	D.F.(tanδ)	≦200% of the specified value
	ESR	≦200% of the specified value
	Leakage current	≦The specified value

Dimensions (mm)

Size	ΦD	L	W	H	C	R	P	V max
6.3*7.7	6.3	7.7	6.6	6.6	7.3	0.5~0.8	2.1	0.3
8*10.5	8	10.5	8.3	8.3	9	0.7~1.1	3.2	0.3
10*10.5	10	10.5	10.3	10.3	11	0.7~1.3	4.6	0.3
10*12.5	10	12.5	10.3	10.3	11	0.7~1.3	4.6	0.3

product-description1

Standard Ratings

Rated voltage (V)	Rated capacitance(uF)	Case size ΦD*L(mm)	Leakage carrent (uA)	ESR(mΩ) at 20℃,100 KHz	Rated ripple current (mArms/125℃/100kHz)	tanδ（120Hz）
16 （1C）	120	6.3*7.7	19.2	40	1100	0.16
	270	8*10.5	43.2	26	1500	0.16
	470	10*10.5	75.2	21	2000	0.16
	560	10*12.5	89.6	15	2300	0.16
25 (1E)	68	6.3*7.7	17	45	1000	0.16
	150	8*10.5	37.5	27	1300	0.16
	270	10*10.5	67.5	22	1500	0.16
	330	10*12.5	82.5	16	1700	0.16
35 (1V)	47	6.3*7.7	16.45	60	900	0.16
	100	8*10.5	35	30	1200	0.16
	150	10*10.5	52.5	23	1400	0.16
	220	10*12.5	77	17	1700	0.16
40 (1G)	27	6.3*7.7	10.8	70	900	0.16
	56	8*10.5	22.4	32	1200	0.16
	100	10*10.5	40	24	1400	0.16
	120	10*12.5	48	18	1600	0.16
50 (1H)	15	6.3*7.7	10	80	800	0.16
	33	8*10.5	16.5	35	1100	0.16
	56	10*10.5	28	25	1300	0.16
	82	10*12.5	41	19	1500	0.16
63 (1J)	10	6.3*7.7	10	100	700	0.16
	22	8*10.5	13.86	40	1000	0.16
	33	8*10.5	20.79	40	1000	0.16
	33	10*10.5	20.79	30	1200	0.16
	47	10*10.5	29.61	30	1200	0.16
	56	10*12.5	35.28	22	1400	0.16
80 (1K)	12	10*10.5	10	70	900	0.16
	15	10*10.5	12	70	900	0.16
	18	10*12.5	14.4	50	1100	0.16
100 (2A)	10	10*10.5	10	80	800	0.16
	12	10*10.5	12	80	800	0.16
	15	10*12.5	15	60	1000	0.16
125	10	10*10.5	12.5	90	700	0.16