Renewable Design for Epoxy Resin 400V 7.5kvar Three Phase Aluminum Electrolytic Polypropylene Power Capacitors Battery of Compensation Automatic
owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for Renewable Design for Epoxy Resin 400V 7.5kvar Three Phase Aluminum Electrolytic Polypropylene Power Capacitors Battery of Compensation Automatic, Sincerely hope we’re increasing up along with our buyers all around the entire world.
owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for China Electronic Component and Capacitor, Besides there are also skilled production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable items quality, increase customers’ satisfaction and achieve win-win situation .
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +125℃ | ||
Rated Voltage Range | 2.5 ~ 25 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 125℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 125℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±10% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
8 |
10 |
10 |
L |
6 |
6 |
7 |
12.0 |
8.0 |
12.6 |
W |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
H |
5.3 |
6.6 |
8.3 |
8.3 |
10.3 |
10.3 |
C |
6 |
7.3 |
9.0 |
9.0 |
11.0 |
11.0 |
R |
0.5~0.8 |
0.5~0.8 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
0.8~1.1 |
P |
1.4 |
2.1 |
3.2 |
3.2 |
4.6 |
4.6 |
Standard Ratings
Rated voltage (V) |
Rated capacitance (uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
Rated ripple carrent (mArms/125℃100kHz) |
4 (0G) |
150 |
6.3*6 |
300 |
0.12 |
35 |
2450 |
700 |
680 |
10*8 |
544 |
0.12 |
25 |
3700 |
1057 |
|
6.3 (0J) |
82 |
6.3*6 |
3600 |
0.12 |
40 |
2400 |
686 |
100 |
6.3*6 |
300 |
0.12 |
40 |
2400 |
686 |
|
10 (1A) |
120 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
150 |
8*7 |
300 |
0.12 |
35 |
2800 |
800 |
|
330 |
10*8 |
660 |
0.12 |
30 |
3700 |
1057 |
|
16 (1C) |
39 |
6.3*6 |
300 |
0.12 |
50 |
2050 |
586 |
47 |
6.3*6 |
300 |
0.12 |
80 |
1260 |
450 |
|
82 |
8*7 |
300 |
0.12 |
40 |
2700 |
711 |
|
150 |
10*8 |
480 |
0.12 |
35 |
3020 |
863 |
|
180 |
10*8 |
576 |
0.12 |
35 |
3020 |
863 |
|
220 |
8*12 |
704 |
0.12 |
20 |
3220 |
889 |
|
270 |
8*12 |
864 |
0.12 |
20 |
4000 |
1250 |
|
330 |
8*12 |
1056 |
0.12 |
20 |
4200 |
1350 |
|
470 |
8*12 |
1504 |
0.12 |
20 |
4300 |
1433 |
|
680 |
10*12 |
2176 |
0.12 |
18 |
4900 |
1400 |
|
25 (1E) |
22 |
6.3*6 |
300 |
0.12 |
70 |
1300 |
400 |
47 |
6.3*7 |
300 |
0.12 |
60 |
1500 |
500 |
|
82 |
10*8 |
410 |
0.12 |
45 |
2400 |
686 |
|
100 |
10*12 |
500 |
0.12 |
30 |
4320 |
1234 |
|
150 |
10*12 |
750 |
0.12 |
45 |
4320 |
1234 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for Renewable Design for Epoxy Resin 400V 7.5kvar Three Phase Aluminum Electrolytic Polypropylene Power Capacitors Battery of Compensation Automatic, Sincerely hope we’re increasing up along with our buyers all around the entire world.
Renewable Design for China Electronic Component and Capacitor, Besides there are also skilled production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable items quality, increase customers’ satisfaction and achieve win-win situation .