SMD Type Conductive Polymer Solid Hybrid Capacitor TB Series
Specifications
| Items | Characteristics | ||
| CategoryTemperature Range | -55 ~ +125℃ | ||
| Rated Voltage Range | 16 ~ 125 V | ||
| Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
| Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
| Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
| Low TemperatureCharacteristics
(Max.Impedance Ratio) |
Z(-55℃)/Z(+20℃) | ≤0.75 to 1.5 | (100KHz) |
| Z(+125℃)/Z(+20℃) | ≤0.75 to 2.0 | ||
| Endurance | The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs; | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH. | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current | ≦The specified value | ||
| Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds | ||
| Appearance | No significant damage | ||
| Capacitance change | ≦±30% of the initial value | ||
| D.F.(tanδ) | ≦200% of the specified value | ||
| ESR | ≦200% of the specified value | ||
| Leakage current |
≦The specified value |
||
Dimensions (mm)
|
Size |
ΦD |
L |
W |
H |
C |
R |
P |
V max |
|
6.3*7.7 |
6.3 |
7.7 |
6.6 |
6.6 |
7.3 |
0.5~0.8 |
2.1 |
0.3 |
|
8*10.5 |
8 |
10.5 |
8.3 |
8.3 |
9 |
0.7~1.1 |
3.2 |
0.3 |
|
10*10.5 |
10 |
10.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
|
10*12.5 |
10 |
12.5 |
10.3 |
10.3 |
11 |
0.7~1.3 |
4.6 |
0.3 |
Standard Ratings
|
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
Leakage carrent (uA) |
ESR(mΩ) |
Rated ripple current (mArms/125℃/100kHz) |
tanδ（120Hz） |
|
16 |
120 |
6.3*7.7 |
19.2 |
40 |
1100 |
0.16 |
|
270 |
8*10.5 |
43.2 |
26 |
1500 |
0.16 |
|
|
470 |
10*10.5 |
75.2 |
21 |
2000 |
0.16 |
|
|
560 |
10*12.5 |
89.6 |
15 |
2300 |
0.16 |
|
|
25 |
68 |
6.3*7.7 |
17 |
45 |
1000 |
0.16 |
|
150 |
8*10.5 |
37.5 |
27 |
1300 |
0.16 |
|
|
270 |
10*10.5 |
67.5 |
22 |
1500 |
0.16 |
|
|
330 |
10*12.5 |
82.5 |
16 |
1700 |
0.16 |
|
|
35 |
47 |
6.3*7.7 |
16.45 |
60 |
900 |
0.16 |
|
100 |
8*10.5 |
35 |
30 |
1200 |
0.16 |
|
|
150 |
10*10.5 |
52.5 |
23 |
1400 |
0.16 |
|
|
220 |
10*12.5 |
77 |
17 |
1700 |
0.16 |
|
|
40 |
27 |
6.3*7.7 |
10.8 |
70 |
900 |
0.16 |
|
56 |
8*10.5 |
22.4 |
32 |
1200 |
0.16 |
|
|
100 |
10*10.5 |
40 |
24 |
1400 |
0.16 |
|
|
120 |
10*12.5 |
48 |
18 |
1600 |
0.16 |
|
|
50 |
15 |
6.3*7.7 |
10 |
80 |
800 |
0.16 |
|
33 |
8*10.5 |
16.5 |
35 |
1100 |
0.16 |
|
|
56 |
10*10.5 |
28 |
25 |
1300 |
0.16 |
|
|
82 |
10*12.5 |
41 |
19 |
1500 |
0.16 |
|
|
63 |
10 |
6.3*7.7 |
10 |
100 |
700 |
0.16 |
|
22 |
8*10.5 |
13.86 |
40 |
1000 |
0.16 |
|
|
33 |
8*10.5 |
20.79 |
40 |
1000 |
0.16 |
|
|
33 |
10*10.5 |
20.79 |
30 |
1200 |
0.16 |
|
|
47 |
10*10.5 |
29.61 |
30 |
1200 |
0.16 |
|
|
56 |
10*12.5 |
35.28 |
22 |
1400 |
0.16 |
|
|
80 |
12 |
10*10.5 |
10 |
70 |
900 |
0.16 |
|
15 |
10*10.5 |
12 |
70 |
900 |
0.16 |
|
|
18 |
10*12.5 |
14.4 |
50 |
1100 |
0.16 |
|
|
100 |
10 |
10*10.5 |
10 |
80 |
800 |
0.16 |
|
12 |
10*10.5 |
12 |
80 |
800 |
0.16 |
|
|
15 |
10*12.5 |
15 |
60 |
1000 |
0.16 |
|
|
125 |
10 |
10*10.5 |
12.5 |
90 |
700 |
0.16 |
Rated Ripple Current Coefficient
| Frequency (Hz) | 120Hz≤f＜1kHz | 1kHz≤f＜10kHz | 10kHz≤f＜100kHz | 100kHz≤f＜500kHz |
| 4.7＜C≦33 | 0.05 | 0.32 | 0.67 | 1.00 |
| C＞33 | 0.10 | 0.35 | 0.70 | 1.00 |
TB Series
●Low ESR
● High Voltage, Long Life
● 125℃,2,000~4,000hrs
● RoHS compliant
Items
Characteristics
Category
Temperature Range
-55 ~ +125℃
Rated Voltage Range
16 ~ 125 V
Capacitance tolerance
±20%(M) (at 20℃,120Hz)
Leakage Current
After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value.
Dissipation Factor
Less than or equal to the specified
(at 20℃,120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-55℃)/Z(+20℃)
≤0.75 to 1.5
(100KHz)
Z(+125℃)/Z(+20℃)
≤0.75 to 2.0
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 to 4,000 hours at 125℃. ΦD=Φ6.3=5,000hrs, ΦD≧Φ8=10,000hrs;
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Damp Heat
(Steady State)
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%～ 95% RH.
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
Surge Voltage
Surge Voltage=Rated voltage * 1.15(V)
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltages specified at 15~35℃ for 30 seconds through aprotective resistor (R=1kΩ) and discharge for 5 minutes 30seconds
Appearance
No significant damage
Capacitance change
≦±30% of the initial value
D.F.(tanδ)
≦200% of the specified value
ESR
≦200% of the specified value
Leakage current
≦The specified value
