Wholesale OEM Jwco Meets International Standards for Aluminum Electrolytic Capacitors
All we do is usually affiliated with our tenet ” Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Wholesale OEM Jwco Meets International Standards for Aluminum Electrolytic Capacitors, We will do our best to satisfy your prerequisites and are sincerely on the lookout forward to acquiring mutual effective enterprise marriage with you!
All we do is usually affiliated with our tenet ” Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for China International Standards and High Quality, With well educated, innovative and energetic staff, we have been responsible for all elements of research, design, manufacture, sale and distribution. By studying and developing new techniques, we have been not only following but also leading fashion industry. We listen attentively to the feedback from our customers and offer instant replies. You will instantly feel our specialist and attentive service.
Specifications
Items | Characteristics | ||
CategoryTemperature Range | -55 ~ +105℃ | ||
Rated Voltage Range | 35 ~ 250 V | ||
Capacitance tolerance | ±20%(M) (at 20℃,120Hz) | ||
Leakage Current | After 2 minutes applied for rated voltage at 20℃, less than or equal to the specified value. | ||
Dissipation Factor | Less than or equal to the specified | (at 20℃,120Hz) | |
Low TemperatureCharacteristics(Max.Impedance Ratio) | Z(-25℃)/Z(+20℃) | ≤1.25 | (100KHz) |
Z(-55℃)/Z(+20℃) | ≤1.25 | ||
Endurance | The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 10000 hours at 105℃. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Damp Heat (Steady State) |
The specifications listed below shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60℃, 90%~ 95% RH. | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value | ||
Surge Voltage | Surge Voltage=Rated voltage * 1.15(V)The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at 105℃ for 30 seconds through a protective resistor (Rc=1kΩ) and discharge for 5 minutes 30 seconds | ||
Appearance | No significant damage | ||
Capacitance change | ≦±20% of the initial value | ||
D.F.(tanδ) | ≦150% of the specified value | ||
ESR | ≦150% of the specified value | ||
Leakage current | ≦The specified value |
Dimensions (mm)
ΦD |
5 |
6.3 |
8 |
10 |
P |
2 |
2.5 |
3.5 |
5 |
Φd |
0.5 |
0.5 |
0.6 |
0.6 |
ɑ |
L<16mm:1.0 |
|||
L≧16mm:2.0 |
Standard Ratings
Rated voltage (V) |
Rated capacitance(uF) |
Case size ΦD*L(mm) |
tanδ(120Hz) |
ESR(mΩ) at 20℃,100 KHz |
Rated ripple carrent (mArms/105℃/100kHz) |
35 |
22 |
6.3*8 |
0.12 |
87 |
600 |
33 |
6.3*8 |
0.12 |
62 |
920 |
|
47 |
8*8 |
0.12 |
87 |
1150 |
|
150 |
8*12 |
0.12 |
62 |
1850 |
|
220 |
10*12 |
0.12 |
47 |
2500 |
|
50 |
22 |
6.3*8 |
0.12 |
65 |
1400 |
47 |
8*12 |
0.12 |
31 |
1500 |
|
68 |
10*12 |
0.12 |
26 |
1800 |
|
120 |
10*12 |
0.12 |
25 |
2200 |
|
63 |
22 |
8*8 |
0.12 |
72 |
900 |
33 |
8*12 |
0.12 |
65 |
1200 |
|
82 |
10*12 |
0.12 |
42 |
2100 |
|
80 |
10 |
8*8 |
0.12 |
45 |
950 |
12 |
8*12 |
0.12 |
43 |
1500 |
|
22 |
10*12 |
0.12 |
38 |
1800 |
|
100 |
15 |
8*12 |
0.12 |
44 |
1100 |
22 |
10*12 |
0.12 |
37 |
1500 |
|
33 |
10*12 |
0.12 |
37 |
1800 |
|
160 |
10 |
8*12 |
0.12 |
97 |
950 |
15 |
10*12 |
0.12 |
82 |
1100 |
|
22 |
10*12 |
0.12 |
77 |
1500 |
|
200 |
8.2 |
8*12 |
0.12 |
107 |
700 |
15 |
10*12 |
0.12 |
107 |
850 |
|
220 (2P) |
6.8 |
8*12 |
0.12 |
107 |
550 |
10 |
10*12 |
0.12 |
107 |
750 |
|
250 |
3.3 |
8*12 |
0.12 |
472 |
300 |
6.8 |
10*12 |
0.12 |
444 |
350 |
|
8.2 |
10*12 |
0.12 |
409 |
500 |
Rated Ripple Current Coefficient
Frequency (Hz) |
120Hz≤f<1kHz |
1kHz≤f<10kHz |
10kHz≤f<100kHz |
100kHz≤f<500kHz |
Coefficient |
0.05 |
0.30 |
0.70 |
1.00 |
All we do is usually affiliated with our tenet ” Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Wholesale OEM Jwco Meets International Standards for Aluminum Electrolytic Capacitors, We will do our best to satisfy your prerequisites and are sincerely on the lookout forward to acquiring mutual effective enterprise marriage with you!
Wholesale OEM China International Standards and High Quality, With well educated, innovative and energetic staff, we have been responsible for all elements of research, design, manufacture, sale and distribution. By studying and developing new techniques, we have been not only following but also leading fashion industry. We listen attentively to the feedback from our customers and offer instant replies. You will instantly feel our specialist and attentive service.